AOT-MSK-115A is a 4 in 1 small heat sealing machine. Mainly have the following functions: side seal; purge; vacuum stand; and vacuum seal.
The machine is compatible with drying chambers and glove boxes with argon and nitrogen.
Vacuum degree, relative positive pressure degree, vacuum degree and pressurization time are adjustable.
The purge function will remove oxygen and moisture from the chamber, forming a better SEI layer during cycling.
Specification
|
Product Name |
Pouch cell battery sealing machine |
|
Power |
700 W |
|
Voltage |
Single-phase 110 VAC or 208-240 VAC 50 / 60 Hz |
|
Sealing Die |
Sealing width: 4 mm (The sealing width could be customizable) Sealing length: ≤ 190 mm Sealing evenness: ≤ 0.03 mm overlapping precision of top and bottom sealing dies Sealing die type: Sealing blade with rubber buffer (soft-sealing) |
|
Max Pouch cell size |
Length ≤ 160 mm Width ≤ 180 mm Thickness ≤ 12 mm |
|
Sealing mode |
side / top-sealing without vacuum or Vacuum sealing |
|
Sealing Temperature |
50 ~ 260ºC Max. ( +/- 2 ºC) adjustable |
|
Recommended temperature |
200 ℃ for top sealing die, and 160 ℃ for bottom sealing die |
|
Vacuum standing time |
0 - 900 S |
|
Heated sealing time |
3 ~ 4 seconds recommended |
|
Size |
455 mm L x 390 mm W x 600 mm H |
|
Weight |
56kg |
|
Notes |
A KF40 Feedthrough for Glovebox is included in the package. |
![Mg[B(HFIP)4]2](/uploadfile/202401/09/15f1a3930e925703c1b1aaa1833dc2cb_medium.jpg)
IPv6 network supported
