Charge and Discharge Analyzer Aging Testing Equipment For Lithium Battery
AOT-BCDS aging cabinet is mainly used for charging and discharging cycle test of finished lithium battery. The test items include: battery charging protection voltage, discharge protection voltage, capacity and other testsThe equipment has 4 test steps of charging, discharging, shelving and cycling.By editing the corresponding steps, the battery can be tested according to the set process.
Main features:
1.With anti-reverse connection protection function, power-off continuous measurement function
2.With on-screen display, can be used offline
3.Suitable for lithium battery training manufacturers, maintenance points, small PACK manufacturers, etc.
Specifications：
|
Input power |
AC 220V ±10% / 50Hz |
|
|
Voltage |
Per Channel Voltage Range
|
7-70V |
|
Accuracy |
±(0.2% of reading + 0.2% of range) |
|
|
Current |
Per Channel Current Range |
50~5000mA |
|
Accuracy |
±(0.2% of reading + 0.2% of range) |
|
|
Discharge range |
50~10000mA |
|
|
Accuracy |
±(0.2% of reading + 0.2% of range) |
|
|
Charging |
Cut-off current |
Minium: 50mA |
|
Capacity |
Accuracy |
±1‰ |
|
Power
|
Per Channel Output Power |
700W |
|
Time |
Current Response Time |
The Current gets to 20A Hardware Response Time is 2s |
|
Step Time Range |
0-999 hours/step |
|
|
Data recording interval |
5s |
|
|
Charging mode |
Constant current and constant voltage charging |
|
|
discharge mode |
Constant current discharge |
|
|
Cyclic measuring range |
100times |
|
|
Number of steps in a single cycle |
8 |
|
|
Voltage and current detection sampling |
Four-wire sampling |
|
|
Data output method |
EXCEL, TXT, Charts |
|
|
Size |
L*D*H300*450*170 (mm) |
|
![Mg[B(HFIP)4]2](/uploadfile/202401/09/15f1a3930e925703c1b1aaa1833dc2cb_medium.jpg)
IPv6 network supported
