AOT-ASD928 series comprehensive tester consists of tester and touch screen. It is mainly used for functional testing, parameter testing and performance evaluation of external power supply PCBA and finished products such as mobile power supply and adapter.
The ASD928 comprehensive tester consists of a tester and a touch screen. It is mainly used for functional testing, parameter testing and performance evaluation of external power supply PCBA and finished products such as mobile power supplies and adapters.
The tester integrates two independent analog battery modules corresponding to 2 test ports, and two independent bidirectional power modules corresponding to 8 test ports.
The simulated battery can simulate the charging and discharging phenomenon of the rechargeable battery. The bidirectional power supply has both power and load functions and supports QC and PD fast charging protocols.
A single device can complete most of the functional tests of PCBA or finished products. There is no need for external lithium-ion batteries to test mobile power supplies, and there is no need for decoys, power supplies, loads and other equipment to test fast charging.
Support protocol automatic detection, support programming automatic test. It supports data storage, import and export, and the test results can be exported to a USB storage device in the form of a document.
Main feature
● 10-inch high-definition LCD touch screen, Angson OS operation interface, support Chinese and English switching
● Integrate fast charging source and fast charging load;
● The standard model supports QC2.0 and PD2.0 fast charging protocols, which can quickly set voltage and current parameters;
● R&D mode, parameters can be adjusted manually, and the charge-discharge curve can be displayed;
● Automatic test & mixed automatic, can test multiple functions of two products at one time, or test only one multi-port product
● It can be used to test products such as power bank, adapter, USB socket, etc.;
● It can test the charging and discharging voltage, current and power of the product;
● It can test the product's overcurrent protection and output current, quiescent current;
● It can test the D+, D- value and the front and back of Type-C output by the USB port of the product;
● Support importing or exporting files through USB storage device;
● When the function is increased, the operating software can be automatically upgraded online;
● Single-channel analog battery 20V 10A, bidirectional power supply 20V 5A
● Automatic mode supports scanner startup and automatic startup
● With one-key detection protocol function, comparable to POWER-Z
● Small size, easy to carry and maintain
● Simulate battery can set step mode, quickly test battery protection point
● Expandable accessories to support more tests (temperature probe/full pin test box with C port/wireless charging and receiving module)
● The produced test wire ensures the test and reliability of high current, and a set is randomly equipped
● Replaceable adapter cable, which can be replaced at any time after the connector is worn out, no need to replace it as a whole.
● After using the C-to-C test cable with E-mark, it can reach 20V 5A 100W charge and discharge (need to purchase the cable separately)
● D+/D- in PD mode can be tested
![Mg[B(HFIP)4]2](/uploadfile/202401/09/15f1a3930e925703c1b1aaa1833dc2cb_medium.jpg)
IPv6 network supported
