Hot Melt Adhesive Polymer Tape for Heat Sealing Pouch Cell Tabs
Hot Melt Adhesives Polymer Tapes)for Heat Sealing Pouch Cells.
This hot melt adhesive/sealant is specially designed to seal labels between aluminum laminated film pouch battery compartments.
|
Product Name |
Polymer Tape |
|
Thickness |
100 um |
|
Width |
5mm |
|
Length |
1 roll/200m |
|
Material |
Enhanced Sulfurized Polymer Resin Material (3 Layers Lamination) |
|
Outside Layers (Both Sides) Thermal Softening Index |
116ºC/ 3 Seconds/ 0.3Mpa/ 180ºC (Reference only) |
|
Outside Layers (Both Sides) Thermal Melting Index |
135ºC/ 3 Seconds/ 0.3Mpa/ 180ºC (Reference only) |
|
Middle Layers (Both Sides) Thermal Softening Index |
145ºC/ 3 Seconds/ 0.3Mpa/ 180ºC (Reference only) |
|
Middle Layers (Both Sides) Thermal Melting Index |
175ºC/ 3 Seconds/ 0.3Mpa/ 180ºC (Reference only) |
|
Removal Strength from Tab |
> 15N/15mm |
|
Removal Strength from Al Lamination Film (Cell Case) |
> 35N/15mm |
|
Resistance to LiPF6 Solution (1:1:1) |
No Change in the Solution @ 85ºC*24 Hours |
|
Packing |
Sealed in vacuumed Al bag when shipping |
![Mg[B(HFIP)4]2](/uploadfile/202401/09/15f1a3930e925703c1b1aaa1833dc2cb_medium.jpg)
IPv6 network supported
