AOT-MSK-330P is a manual tab spot welding machine. Suitable for (Alkaline, NiMH, NiCd, Li-Ion/Li-MnNi, LifePO4, NMC), etc., with more reliable and consistent welding.For AA/AAA/C/D/F/M/10440/14430/14500/14650/17500/18650/26650/38120/40160 size batteries.
Specification
|
Product Name |
Desk-Top Tab Spot Welder |
|
Voltage |
208-240V AC, 50/60Hz |
|
Power |
15 KVA |
|
Welding |
1.Support double welding process; 2.Welding head height adjustable; 3.Nickel-plated tab thickness can reach 0.5mm; 4.The pressure of the two welding probes is independently adjusted; 5.Small heat-affected weld zone; 6.Capable of very fine energy regulation; 7.Current: 0-99% adjustable; |
|
Welding probes |
1.Independent pressure adjustment 2.Consistent welding pressure 3.Eliminate the phenomenon of low voltage or condensation after welding of lithium batteries 4.Uniform welding spot, small spark, no black spot, stable welding current 5.Fast energy release for welding highly conductive metals such as copper 6.Small heat-affected weld zone |
|
Welding Switch |
Built-in optoelectronic welding switch, which can eliminate the need of changing switches for similar welding machines |
|
Tab Thickness |
0.2 - 0.5mm thickness tab |
|
Controller |
Digital LED control panel for setting all parameters All parameters are set via microcomputer. Adopts LCD display and keypad adjustment, resulting in accuracy, visualization, and easy operation Pre-welding time: 0 - 99 ms Welding time: 0 - 999 ms Welding current: 1- 30A |
|
Working Space |
Max. The opening between the welding tip and bottom stage is 9cm (19cm by removing the bottom stage) Max. Depth is 8.5cm (measured from the center of the bottom stage till the backend of the machine) |
|
Safety Protection |
Fuse to Protect Over Current Warning Lights for Switch device / Weld Head Transformer / Air Supply |
|
Size |
Working Table: L810 mm x W610 mm x H790 mm Welding machine: L319 x W210 mm x H310 mm |
![Mg[B(HFIP)4]2](/uploadfile/202401/09/15f1a3930e925703c1b1aaa1833dc2cb_medium.jpg)
IPv6 network supported
