Automatic Electric Crimping Machine For CR20XX Coin Cells
AOT-DF160 electric hydraulic sealing machine is mainly used in laboratory battery material research and development for the preparation of samples, capacitors scientific research sealing, can also be used in factory small batch trial production. The electric method saves effort, and different molds can also be used for dry powder pressing sheet, wet powder pressing sheet, pressing molding, riveting and other operations. Standard configuration can be used for CR2016, CR2025, CR2032 button batteries. It can also sealing CR2450, CR1620 and other button batteries after replacing some mold accessories. It has the advantages of small size, convenient operation and accurate molding.
|
Model |
Electric crimping machine AOT-DF-160 |
|
Source voltage |
AC220V-110V, 50HZ |
|
Power |
120W |
|
Die Set Material |
Hardened Steel |
|
Die Set & Compatibility |
Assembling dies for CR2016, CR2025 & CR2032 coin cells Optional: Crimping die for CR2450 coin cell is available upon request |
|
Assembling Pressure |
Recommended assembling pressure for CR20XX coin cells is about 100kg/cm2, Max. pressure can be applied to 200kg/cm2, up to 8T |
|
Measurement Accuracy |
±0.5%FS |
|
Product Dimensions |
228mm(L) x 176mm(W) x 310mm(H) |
|
Weight |
About 40kg |
|
Application Notes |
Electrolytes are highly corrosive materials, and therefore the dies must be cleaned with alcohol after each use to avoid corrosion and deformation. |
|
Warranty |
One Year limited warranty with lifetime support |
![Mg[B(HFIP)4]2](/uploadfile/202401/09/15f1a3930e925703c1b1aaa1833dc2cb_medium.jpg)
IPv6 network supported
