Coin Cell Parts,Battery Assembly Machine,Battery Lab Equipment,Battery Raw Material- AOTELEC

Sodium Battery Lithium Battery Slurry Resistance Tester

AOT-BSR2300 use the upper, middle and lower three pairs of electrodes to test the resistivity of the slurry at different vertical heights, evaluate the conductivity of different formulations of slurry and the settlement performance with the standing time.
Read More
AOT-TB-616 Spin coater /High precision spin coater

High-precision spin coater used in liquid, surface film for silicon wafers, glass, ceramics and plate surface coater process.
Read More
Roll-to-Roll Hot Laminator for Tri-Layer Composite

AOT-MSK-BSL-H200 is a roll-to-roll hot laminator for forming trilayer composite. The protection layers can be used to protect the lamination layers during rolling press and then being removed after press.
Read More
300W Outdoor Portable Mobile Energy Storage Power Supply Energy Storage Battery

This portable energy storage battery can charge and supply power for a variety of electrical equipment, multiple units are charged at the same time.
Read More
Lithium Battery Protection Board Tester BMS Tester

It is mainly used for the safety test of lithium battery protection board, and is compatible with various common protection board types.
Read More
Sodium Nickel-Manganese Oxide for Sodium Battery Cathode Material

Sodium Nickel-Manganese Oxide breaks the traditional sodium battery voltage range limit of 2-4V and can be charged up to 4.2V, greatly improving the energy density.
Read More
Kuraray YP-80F Activated Carbon Powder for Supercapacitor

Kuraray YP-80F Activated Carbon Powder features a large specific surface area, reasonable pore size distribution, low ash and moisture content.
Read More
Kuraray Activated Carbon Powder YP-50F for Lab Battery Raw Material

Kuraray YP-50F activated carbon powder has a well-developed pore structure, a large specific surface area, strong adsorption capacity and can efficiently adsorb various substances.
- Activated Carbon Powder YP-50F
- Activated Carbon Powder for Lab Battery Raw Material
Read More
5KV Battery Hi-Pot Tester for Insulation Breakdown and Destructive Testing

The RK2672 series withstand voltage tester is an instrument for measuring the withstand voltage strength.
Read More
15KV-50KV Battery Hi-Pot Tester for Insulation Breakdown and Destructive Testing

The RK2674 series withstand voltage tester is an instrument for measuring the withstand voltage strength.
Read More
Constant Temperature and Humidity Test Chamber

The constant temperature and humidity test chamber can precisely control temperature and humidity, making it suitable for product reliability testing and material aging tests.
Read More
Gantry-Type Continuous Galvanometer Welding Machine

The continuous galvanometer fiber laser welding machine has excellent rigidity and stability.
Read More
Compact Disassembling Cutter Machine for 18650 Cylindrical Cases

MSK-530B cylindrical battery disassembling machine is a specialized machine designed for laboratory analysis of the internal state of cylindrical batteries. Different specifications of molds can be selected to disassemble cylindrical batteries of different models. Max: Diameter 50mm x Length 100mm; Min: Diameter 5mm x Length 40mm; This device uses 1
Read More
100w Fiber Laser Cleaning Machine for Remove Dirt, Rust, Coatings

Fiber laser cleaning machine featuring excellent cleaning effect, high precision, minimal damage to workpieces, and environmental friendliness.
Read More
Cylinder Battery High-Frequency Inverter Spot Welding Machine

This machine is controlled by a microcomputer single-chip microcomputer. The welding operation is programmed, with beautiful weld points, small sparks.
Read More
Cylinder Battery Cell Single Point Pneumatic Spot Welder

AOT-MSK330A is mainly used for welding the cylinder core's negative terminal (Nickel tab) to the bottom of the cylinder case. It can also be applied to welding processes for nickel hydrogen, nickel chromium, and various lithium-ion batteries.
Read More
9+3 single-sided ceramic-coated separator (PE base film + alumina coating)

The coating forms a dense barrier through high-temperature sintering, enabling the separator to withstand temperatures above 1800℃. This effectively blocks heat conduction during thermal runaway.
Read More
12+2um single sided ceramic coated separator (PE base film + alumina coating)

single sided ceramic coated separator features high thermal stability, low thermal shrinkage rate and high wettability with electrolytes.
- high quality PE Separator
Read More
Battery Material 25μm Polypropylene Film PE Separator for Battery Research

The PE separator for lithium batteries is made of polyethylene material and features a micro-porous structure.
- Polypropylene Film Separator
Read More
Lithium Ion Battery PE Poly 14um Polypropylene Film Separator

The functional film mainly made of polyethylene (PE) plays a key role in physically isolating the positive and negative electrodes to prevent short circuits.
Read More

1 2 3 4 5 ... 23

A total of 23 pages

categories

Hot Products

Request a free quote

Call Us
Tel/Whatsapp: 0086-592-7161550
Email Us
ping@aotbattery.com

follow us

Friend link :

AOT BATTERY

IPv6 network supported

Leave a message

welcome to aotelec

Home

Products

News

Contact