-
May , 12 2023
During the mixing machine, transportation, and coating processes of the mixer, foreign objects such as dust or long flocs are mixed into the coating liquid or fall onto the wet coating surface,The surface tension of the coating at this location is affected by external forces, resulting in a change in intermolecular forces. The slurry undergoes a slight transfer, and after drying, a circular mark i...
View More
-
Apr , 11 2023
The micro-gravure coating method uses a gravure roll, the gravure roll surface is mounted on bearings, partially immersed in the feed pan, and the rotating shaft picks up the coating, After quantification by a flexible rigid scraper, the coating liquid is taken away by the reverse motion substrate to achieve uniform thin layer coating. The direction of rotation of the microgravure coating gravure ...
View More
-
Mar , 01 2023
The charging/discharging efficiency and cycle performance of conventional sodium-ion batteries will deteriorate when the temperature increases, which limits the application range. Therefore, it is necessary to solve the problem of poor cycle performance at high temperatures. The following are several ways to improve high temperature cycle performance. 1. Add a certain amount of vinylene carbonate,...
View More
-
Feb , 20 2023
1. Energy density; Since the density of solid is higher than that of liquid, if the same volume of solid electrolyte is used to replace the lithium battery electrolyte, the weight of the battery will increase, resulting in a decrease in the energy density (wh/kg) of the battery calculated by weight. The energy density of subsequent solid-state batteries will be significantly improved due to the us...
View More
-
Dec , 01 2022
As the core equipment for the preparation of ternary materials, sintering equipment is generally used for sintering preparation in a fixed box-type muffle furnace during research and development.But in actual production, for higher production efficiency and suitable production cost, we must choose high-capacity sintering equipment such as roller kiln and rotary kiln. The structure of different sin...
View More
-
Nov , 23 2022
There are several types of wrinkling of the lithium battery electrode sheets, the wavy edge of the lithium battery electrode, the wrinkle of the lithium battery electrode, and the wrinkling of the paint area. Of course, there are several degrees of wrinkling severity. Wrinkles in the coating area of the electrode will cause the surface of the bare cell to be uneven, and the stress conce...
View More
-
Nov , 01 2022
During the coating process, various defects may occur on the film surface, such as bubbles, fat edges, craters, polygonal depressions, orange peels, etc. Shrinkage cavities are one of the most common problems.The surface depression of the coating film, that is, the shrinkage cavity, is fundamentally caused by the surface tension gradient generated during the film formation. This phenomenon is call...
View More
-
Oct , 11 2022
The negative electrode material is made into a negative electrode sheet by mixing, coating, rolling, shooting, and drying.Use a lithium sheet as the positive electrode, assemble it into a button battery for testing, and calculate the gram capacity of the material by testing the capacity of the button battery. Required materials and equipment; Positive powder Electrolyte LB-5275 Carbon black KS-6 A...
View More
-
Oct , 11 2022
View More