Coin Cell Parts,Battery Assembly Machine,Battery Lab Equipment,Battery Raw Material- AOTELEC

Automatic Pouch Case Forming Machine for Pouch Cell Production

AOT-MSK-120A is an automatic roll-to-roll case/cup forming machine for pouch cell battery production. Polymer casings made from aluminum laminate films can be prepared automatically and at high speed.

Tags :

Pole Piece Electrode Die Cutting Machine For Pouch Cell Battery

AOT-DC-80 die cutting machine is suitable for die cutting of positive and negative plates of pouch cell batteries. It is pneumatically die cutting and can be used in a glove box.

Tags :

Pouch Cell Hot Press Shaping Machine For Core After Stacking

AOT-HPS-200H is mainly suitable for hot flat pressing after the battery core is wound. First, place the wound cell on the template, and shape the cell by pressing and heating, so that the thickness of the cell is consistent, the elasticity of the cell is reduced, and the short-circuit rate of the cell is reduced.

Tags :

Pneumatic Cylindrical Battery Sealing Machine For Battery Cases Crimper

AOT-QF650 pneumatic sealing machine is mainly used for laboratory battery material research to make cylindrical batteries. Standard equipped with 18650 cylindrical battery sealing mold ， other cylindrical battery sealing molds can also be selected.

Tags :

Lithium Battery Tab Laser Cutting and Welding Machine

Tab Laser Cutting and Welding Machine For Lithium Battery

This equipment is mainly used for forming the tabs on both sides of the positive and negative plates of lithium batteries.

Tags :

LiNI0.5Mn1.5O4 (LNMO) Cathode Powder For Lithium Battery

LiNi0.5Mn1.5O4 (LNMO) cathode material powders are attractive for next-generation 5V Li-ion batteries due to their high discharge plateau, good stability, and cycling performance.

Tags :

Automatic Pouch Cell Battery Stacking Machine for Pouch Cell Electrode

This is a large automatic stacking for large pouch cell battery, the maximum size of pouch cell electrodes can be up to L380 mm x W1200 mm x 15mm.

Tags :

1L Small Laboratory Planetary Ball Mill

This ball mill can mix products of different particle sizes and materials by dry and wet grinding, and the minimum particle size of the ground products can reach 0.1 microns (ie 1.0 × 10 mm-4).

Tags :

DDS-307 Series Lab Bench Top Conductivity Meter

DDS-307 series conductivity meter is rapid determination of water quality. Mainly used in environmental testing, water quality testing, laboratory research, etc.

Tags :

Compact Vacuum Electrolyte Injection Machine for Lithium Battery

AOT-MSK-113CP is a compact vacuum liquid electrolyte injection machine for pouch cell and cylindrical battery,can be used inside the Ar gas glove box.

Tags :

Roll to Roll Automatic Continuous Slitting Machine for Lithium Battery

AOT-MSK-540II is a Roll to Roll automatic continuous slitting machine for lithium battery.

Tags :

Lab Equipment for Pouch Cell Battery Research

Pouch Cell Battery Equipment for Lab Research

AOT company has a full range of lithium ion battery products series:lithium ion battery(Al shell,polymer,cylindrical,energy storage,bike motive,Electric Vehicle,PACK battery),material,equipment.We provide you with a technology improvement program!

Tags :

Cylindrical Cell Battery Assembly Equipment for Cylindrical Batteries Making

This lab line is a for Cylindrical Batteries Making .

Tags :

Coin Cell Lab Line Equipment For Lithium Battery

This is a simple lab line for coin cell research, If you don't have much budget, we also have another lab line with low cost by changing some small equipment.

Tags :

Drum Ball Mill For Laboratory Research

The experimental drum ball mill is an ultra-fine grinding and mixing equipment for laboratory and small batch production. The machine is compact in structure, convenient in operation, high in work efficiency and uniform in grinding particle size. It is the preferred equipment for scientific research, teaching, testing and production. It can be wide1

Tags :

Desk-Top Tab Spot Welder For lithium Battery Pack

AOT-MSK-330P is a manual tab spot welding machine. Suitable for (Alkaline, NiMH, NiCd, Li-Ion/Li-MnNi, LifePO4, NMC), etc., with more reliable and consistent welding.For AA/AAA/C/D/F/M/10440/14430/14500/14650/17500/18650/26650/38120/40160 size batteries.

Tags :

Polytetrafluoroethylene (PTFE) Condensed Liquid Binder

PTFE Liquid Binder for Li-ion Battery

PTFE adhesive has good high temperature resistance and excellent electrical insulation. It is a fine dispersion stabilized by non-ionic surfactants with a solids content of PTFE up to 60%.

Tags :

Sodium Battery Materials Electrolyte NaPF6

High-Purity NaPF6 Sodium Battery Electrolyte for Na-ion Battery Raw Material. Sodium ion battery electrolyte, can be customized if there is special need.

Tags :

Zinc Chips Zinc ion Battery Anode Electrode Chips

Zinc metal chips has excellent properties such as high capacity, non-toxicity, relatively low redox potential (-0.76V vs SHE), high safety, and low cost, and has been considered as an ideal anode material for primary and secondary zinc batteries.

Tags :

Large Pouch Cell Case Forming Machine for Aluminum-Laminated Films

AOT-MSK-700 is customized and manually pouch cell case forming machine with Max/ 600 x 600 mm pouch die , used for making large pouch cell in battery research .

Tags :

Products

Request a free quote