Coin Cell Parts,Battery Assembly Machine,Battery Lab Equipment,Battery Raw Material- AOTELEC

Automatic Electric Crimping Machine For CR20XX Coin Cells

AOT-DF160 electric hydraulic sealing machine is mainly used in laboratory battery material research and development for the preparation of samples, capacitors scientific research sealing, can also be used in factory small batch trial production. The electric method saves effort, and different molds can also be used for dry powder pressing sheet, we1
Read More
Split-able Pouch Cell with Optional Size for Lithium Battery

AOT-EQ-SPC-Series are splittable pouch cells made of Nylon or Peek, which are designed for testing pouch cells with max electrode dimension of different size. Its detachable design allows you to test the pouch cell behavior as well as structural changes of electrode easily, quickly and cost effectively.
Read More
Hi-Speed Spin Coater Machine For Battery Reserach

AOT-VTC-100PA is spin coaster can be used inside the glovebox with Ar gas. This is a tabletop spin coater up to 5(ich) diameter at Max. 10000 rpm. The spin head actuator is a precision DC servo motor with accurate speed and acceleration control.
Read More
Automatic Pouch Cell Stacking Machine For Lithium Battery

AOT-MSK-111A-ES is a desktop high-precision automatic stacker that can be used in an argon glove box. Using a "Z"-shaped stacking method, the anode and cathode electrodes are alternately stacked with a separator in between.
Read More
Battery Pack Comprehensive Tester Testing Machine

The comprehensive test equipment for finished battery is a fast and accurate device for testing the performance of finished battery. The main test items include: open circuit voltage, AC internal resistance, discharge test, discharge over-current test, short circuit protection test, charging test and charging protection test. The system adopts 32-b1
Read More
Charging And Discharging Cycle Tester For Lithium Battery

This battery tester is mainly used for charging and discharging cycle test of lithium battery. The test items mainly include battery charging protection voltage, discharge protection voltage, capacity, etc. The equipment has four test steps①Charge, ②Discharge, ③Idle ④ Cycle. Test the battery by editing the corresponding steps and the set process.1
Read More
Battery Casting Coater Machine with Heated Vacuum Bed And Doctor Blade

MSK-AFA-H200A Is an standard Compact Tape Casting Coater with a vacuum chuck hotplate up to 250ºC and an active carbon filter on the top cover to protect the lab environment.
Read More
Precision Die Cutter for Pouch Cell electrode Sheet

AOT-MSK-180 is a CE certified precision electrode die-cutting machine that accepts size customization. It is a must-have tool for producing specific shapes of positive and negative electrodes with current collectors in pouch cell production lines. IR sensor built into the front of the machine for safe operation.
Read More
Pneumatic Pedal Type Desk-Top Spot Welder For Lithium Battery

AOT-MSK-320A is a capacitive discharge spot welder driven by compressed air. It is specially designed for the production of battery manufacturers (NiMH.NiCd, Li-Ion/LiMnNi.LifePO4), welding is more reliable, more consistent and more accurate than AC pulse.
Read More
Floor-stand Auto Crimper for Cylindrical Battery

AOT-MSK-510-AR18650 is an automatic crimping machine for sealing 18650 cylindrical battery boxes. It provides a continuous workflow for case batch loading - crimping - case unloading, saving time and increasing efficiency.
Read More
Mandrel Bending Tester for Flexible Battery Electrode Testing

AOT-MBT-12-LD is suitable for testing the flexibility of battery electrode sheets or films. It is a manually operated mandrel bending tester with 12 cylinders of various sizes, including 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 25, 32mm diameter.
Read More
Electric Hot Rolling Press with Variable Speed (Ar Gas Compatible)For Lab

AOT-MSK-HRP-01 is a compact hot rolling cylinder press, max. The working temperature is 100℃. It is specially designed for preparing battery electrodes inside and outside the glove box. It is compatible with Ar gas. In lithium-ion battery research, applications such as increasing the density of electrode active materials after coating are very effe1
Read More
Lithium Battery Cathode Aluminum Foil Double Side Coated by Li-NCM (523 )

This electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide in double side and is used as the cathode of Li-Ion battery.
Read More
Vacuum Sealing Machine For Pouch Cell Battery

AOT-YF200 compact vacuum sealer is used for sealing aluminum-laminated case in glove box after injection of electrolyte into pouch Li-ion cell or after formation for final seal (polymer Li-Ion cell). Heatable sealer blade is built into the chamber, automatically sealing the aluminum film pouch case for polymer battery
Read More
Semi-automatic Battery Slitting Machine for Pouch Cell Battery

AOT-MSK-300is a semi-automatic roll slitting machine for preparing electrode of cylinder batteries and pouch cell in laboratories.Eelectric slitting machine can be applied to the precise slitting process of positive and negative plates of lithium ion batteries. Sheet feeding, upper and lower circular knife slitting, electric drive,1
Read More
Lab Manual Pouch Cell Stacking Machine

AOT-DP200 battery stacking machine is a manual laminating machine. It is an ideal tool for stacking multiple layers of positive & negative electrode and separator for pouch cell battery. This is used for lithium battery stacking process, put the cathode, anode electrode and battery separator Z shaped lamination.
Read More
Planetary Vacuum Mixer For Lithium Battery Laboratory Research

AOT-MSK-SFM-2L is a Tri-Shaft Planetary Vacuum Mixer with a 2-liter container and PLC Touch Panel Control. Such a vacuum mixer incorporates the unique tri-shaft stirring design to ensure a gas-bubble free blending of complex materials under vacuum with extreme uniformity.
Read More
Uniform Heating Adjustable Tilting Rotary Tube Furnace For Laboratory Research

AOT-T1200 series furnaces are split-able tube furnaces with Fe-Cr-Al alloy heating elements. The precision temperature controller can provide 51 segments heating and cooling steps with +/- 1 ºC accuracy.The furnace is installed with 60mm to 100mm O. D quartz tube with a pair of smart stainless steel vacuum sealing flange and valve/gauge which 1
Read More
Grade Sodium Metal Chips For Coin Cell Raw Material

It is specially designed for button batteries (2032, 2025, 2016) to use composite sodium sheets, with a diameter of 15.6mm, a thickness of 0.4~0.5 mm, and a purity of more than 99.7%.
Read More
High Temperature Muffle Furnaces For Laboratory Research

The furnace consists of high quality alumina fiber brick and MoSi2 heating elements with special design, and furnace temperature is controlled byhigh precision SCR (Silicon Controlled Rectifier) digital controller with accuracy ±1℃ and 30 segments programmable.
Read More

1 ... 11 12 13 14 15 ... 23

A total of 23 pages

categories

Hot Products

Request a free quote

Call Us
Tel/Whatsapp: 0086-592-7161550
Email Us
ping@aotbattery.com

follow us

Friend link :

AOT BATTERY

IPv6 network supported

Leave a message

welcome to aotelec

Home

Products

News

Contact