Electrode Winding Equipment Suppliers,Electrode Winding Equipment Manufacturers

High Quality Glassy Carbon Electrode GCE for Lab Battery Experiment

The glassy carbon electrode is abbreviated as GCE, which slowly heats polyacrylonitrile resin or phenolic resin to high temperature (up to 1800C) in an inert atmosphere to form glass-like amorphous carbon, which is suitable for electronic conductor materials for electrodes.

Tags :

Automatic Battery Pack Assembly Line for EV and Energy Store

AOTELEC Battery Technology has independently developed a semi-automatic assembly line system for lithium battery PACK

Tags :

Split Cell With Quartz Window for In-Situ Optical Microscope Analysis of Battery Electrode Interface

AOT-EQ-STC-PQW split test cell is made of PEEK (Poly Ether Ether Ketone) plastic and designed for R&D of rechargeable battery material.

Tags :

Semi-Automatic Battery Stacking Machine for Pouch Cell

This equipment is mainly used for zigzag laminations of square lithium-ion power battery cells.

Tags :

Cell Pack BMS Tester For Lithium Battery

This machine can test overcharge protection voltage, overcharge recovery voltage, overdischarge protection voltage, overdischarge recovery voltage, overcurrent protection current, overcurrent protection delay, etc.

Tags :

Conductive Carbon Coated Copper Foil For Lithium ion Battery lab Research

Conductive carbon-coated copper foil can replace conventional Al foil as a better anode substrate with improved properties.

Tags :

Graphite Coated Copper Foil Electrode Disk for Coin Cells

AOT- GCEDis a Diameter 19 pre-cut graphite coated copper foil for CR20XX coin cell battery and split testing cells.

Tags :

Stacking Machine For Lithium Ion Battery

Lab Manual Pouch Cell Stacking Machine

AOT-DP200 battery stacking machine is a manual laminating machine. It is an ideal tool for stacking multiple layers of positive & negative electrode and separator for pouch cell battery. This is used for lithium battery stacking process, put the cathode, anode electrode and battery separator Z shaped lamination.

Tags :

Battery Electrode Slitter Slitting Machine

Semi-automatic Battery Slitting Machine for Pouch Cell Battery

AOT-MSK-300is a semi-automatic roll slitting machine for preparing electrode of cylinder batteries and pouch cell in laboratories.Eelectric slitting machine can be applied to the precise slitting process of positive and negative plates of lithium ion batteries. Sheet feeding, upper and lower circular knife slitting, electric drive,1

Tags :

Mandrel Bending Tester for Flexible Battery Electrode Testing

AOT-MBT-12-LD is suitable for testing the flexibility of battery electrode sheets or films. It is a manually operated mandrel bending tester with 12 cylinders of various sizes, including 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 25, 32mm diameter.

Tags :

Precision Die Cutter for Pouch Cell electrode Sheet

AOT-MSK-180 is a CE certified precision electrode die-cutting machine that accepts size customization. It is a must-have tool for producing specific shapes of positive and negative electrodes with current collectors in pouch cell production lines. IR sensor built into the front of the machine for safe operation.

Tags :

Automatic Electric Crimping Machine For CR20XX Coin Cells

AOT-DF160 electric hydraulic sealing machine is mainly used in laboratory battery material research and development for the preparation of samples, capacitors scientific research sealing, can also be used in factory small batch trial production. The electric method saves effort, and different molds can also be used for dry powder pressing sheet, we1

Tags :