Magnetic Stirrer With Hot Plate Suppliers,Magnetic Stirrer With Hot Plate Manufacturers

Tape Casting Coater with Heated Vacuum Bed And Doctor Blade

Battery Casting Coater Machine with Heated Vacuum Bed And Doctor Blade

MSK-AFA-H200A Is an standard Compact Tape Casting Coater with a vacuum chuck hotplate up to 250ºC and an active carbon filter on the top cover to protect the lab environment.

Tags :

Hi-Speed Spin Coater Machine For Battery Reserach

AOT-VTC-100PA is spin coaster can be used inside the glovebox with Ar gas. This is a tabletop spin coater up to 5(ich) diameter at Max. 10000 rpm. The spin head actuator is a precision DC servo motor with accurate speed and acceleration control.

Tags :

Pneumatic Hot-Press for Pouch Cell SEI Formation

AOT-MSK-131 provides a uniform pressure load and temperature environment for the tested pouch cells for more efficient and high-quality SEI formation. This hot press has precise and constant pressure delivery up to 400 kg and the maximum temperature is 150°C.

Tags :

Pouch Cell Hot Press Shaping Machine For Core After Stacking

AOT-HPS-200H is mainly suitable for hot flat pressing after the battery core is wound. First, place the wound cell on the template, and shape the cell by pressing and heating, so that the thickness of the cell is consistent, the elasticity of the cell is reduced, and the short-circuit rate of the cell is reduced.

Tags :

Hard Carbon Coated Al Foil for Na-ion Battery Cathode Material

This electrode sheet is based on aluminum foil coated with hard carbon , used as a cathode electrode of a Na-Ion battery.

Tags :

Lithium Battery Roll to Roll Press with Automatic Unloading

The equipment has good horizontal and vertical uniformity in rolling, and the appearance of the rolled products is high-quality. The equipment is supplied with pressure by the hydraulic system for roller rolling, suitable for situations where high requirements are placed on rolling force and consistency of rolling gaps.

Tags :

Battery Electrode Split Test Cell with Be Window

AOT-EQ-STC-BEW battery can accommodate electrodes and separators of various sizes (diameter 19, 20, and 24mm). It is designed for simple and rapid assembly testing of rechargeable battery electrode materials.

Tags :

Lab Tube Furnace Single Phase Electric 1200C Vacuum Tubular Furnace with Small Quartz Tube

This tubular furnace takes resistance wire as heating element, adopts double shell structure and temperature control meter, can carry out 30 stage programmed temperature control, phase shift trigger, thyristor control, furnace adopts alumina polycrystalline fiber material, both ends of the furnace tube can be sealed by stainless steel flange, stain1

Tags :

Lithium sulfur battery carbon sulfur composite positive double-sided electrode plate

Lithium-sulfur battery is the next generation of high energy density electrochemical energy storage device, the carbon and sulfur composite positive electrode double-sided electrode plate is the key component to improve its performance. This electrode sheet uses advanced carbon-sulfur composite technology to effectively compound highly conductive c1

Tags :

In-situ Analytical Split Test Cell for Lithium/Zinc Air Battery

It contains a quartz observation window on the bottom which allows in-situ X-Ray analysis of battery material phase transition during charging and discharging process. Two needle valves allow you control air flow pressure and its splittable design provides you the most convenient way to test various anode and cathode materials. It's1

Tags :

Lithium/Zinc Air Battery Split Test Cell

battery making hot air drying oven for lab research

AOT-VDO-2 vacuum drying oven is made of cold rolling process, electrostatic spraying, stainless steel material to ensure that the drying oven is not easy to rust in the humid working environment of the room.

Tags :