Glassy Carbon Electrode GCE Suppliers,Glassy Carbon Electrode GCE Manufacturers

Hard Carbon Coated Al Foil for Na-ion Battery Cathode Material

This electrode sheet is based on aluminum foil coated with hard carbon , used as a cathode electrode of a Na-Ion battery.

Tags :

Soft Carbon Powder For Sodium Ion Battery

Sodium Ion Battery Anode Material Soft Carbon Powder

Soft carbon has adjustable layer spacing and good electronic conductivity, and can be used for sodium battery and lithium battery，it is a common sodium battery material.

Tags :

Coating Adhesion Tester For Battery Electrode Performance Testing

AOT-QFZ is a coating adhesion tester is used to measure the adhesion ability of various coating films to the surface of the object to be coated. The adhesion performance of the paint film was measured by the circle track method, and the integrity of the paint film within the scratch range of the circle rolling line was used to evaluate the adhesion1

Tags :

Ti Metal Foam For Lithium Electrolytic Electrode Material

Titanium Metal Foam For Electrolytic Electrode Material

Titanium foam with high purity titanium powder as raw material, after screen, cold isostatic pressing molding, high temperature, high vacuum sintering.

Tags :

Automatic Stacking Machine For Pouch Cell Electrode

This stacking equipment is suitable for assembling the positive and negative plates of lithium-ion battery cells with Z-shaped laminations and isolation membranes.

Tags :

Three-electrode Sealed electrodes Electrolytic Cell for Laboratory

Tags :

Battery Cathode Material Black Conductive Activated Carbon Paper For Lithium Battery

Toray Paper- TGP-T-060 - is a carbon fiber composite paper suitable for use as a catalyst backing layer for fuel cells,electrolyzers, batteries, and various other electrochemical devices after applying a microporous layer (MPL) onto it.

Tags :

Battery Electrode Split Test Cell with Be Window

AOT-EQ-STC-BEW battery can accommodate electrodes and separators of various sizes (diameter 19, 20, and 24mm). It is designed for simple and rapid assembly testing of rechargeable battery electrode materials.

Tags :

Lithium Battery Electrode Substrate Material Nickel Foam

Nickel Foam For Lithium Battery Electrode Substrate Material

Foam nickel is a kind of porous metal with three-dimensional full through mesh structure, which is made of foam like metal nickel through high-tech deep processing.

Tags :

Aluminum Foil Coating Sodium Nickel Iron Manganate

Sodium Nickel Iron Manganate Coated on Aluminum Foil For Sodium Battery

Sodium Nickel Iron Manganate Coated on Aluminum Foil,The contact between the particles and the current collector is better, and the internal resistance of the battery is smaller, which is conducive to the exertion of gram capacity and improves cycle and rate performance.

Tags :

NFSO High Voltage Sodium Iron Sulfate for Sodium-Ion Battery

The chemical formula of sodium iron sulfate is Na2Fe2 (SO4) 3, and its structure is composed of sodium ions Composed of iron ions and sulfate ions. In electrochemical reactions, sodium iron sulfate can release or absorb metal ions such as lithium ions and sodium ions through ion exchange reactions, achieving the charging and discharging process of 1

Tags :

NMC622 Single Side Coated Aluminum Foil for Battery Cathode Electrode Sheet

Reference for the use of Electrode Sheet: ①Electrode sheet cutting: AOT-DC-80 Cutting machine Recommended size of button electrode sheet: 12mm/14mm diameter. ②Pole piece weighing: AOT series balance active substance formula: active substance mass = (pole piece mass (mg) - disc area (cm2) * collector surface density (mg/cm2) * active substance propo1

Tags :