Disc Cutter With Standard 16 19 20 Dia

Portable Lithium Battery Single Maintenance Tester

AOT-LIFG-0530CT: During the testing process, real-time monitoring of battery voltage and current, and calculation of accumulated charging/discharging power can quickly and accurately maintain batteries with significant voltage drop in the lithium battery module. Suitable for maintenance and testing of various types of lithium batteries.

Tags :

1200-degree atmosphere box-type furnace

This atmosphere box furnace with resistance wire heating element, using double layer shell structure and program temperature control instrument. The furnace is made of alumina polycrystal fiber material, and the double furnace shell is equipped with air cooling system, which can raise and lower the temperature quickly. Can pass argon, nitrogen, oxy1

Tags :

Lab Tube Furnace Single Phase Electric 1200C Vacuum Tubular Furnace with Small Quartz Tube

This tubular furnace takes resistance wire as heating element, adopts double shell structure and temperature control meter, can carry out 30 stage programmed temperature control, phase shift trigger, thyristor control, furnace adopts alumina polycrystalline fiber material, both ends of the furnace tube can be sealed by stainless steel flange, stain1

Tags :

Compact Electric Ring Disc Cutter For Lithium Battery Machine

AOT-MSK-T13 electric ring disc cutter is a pressure controlled battery cutter. This press is driven by a motor, which solves the problem of oil leakage in the glove box of traditional hydraulic presses. It is also small in size, making it easy to pass through the transition compartment inside the glove box. It also can cut round disc and rectangula1

Tags :

Battery cathode material Na3V2(PO4)202F

Na3V2(PO4)202F material has good structural stability and can maintain a high capacity retention rate after multiple charge and discharge cycles, which can extend the service life of the battery and reduce the use cost. Sodium vanadium fluorooxyphosphate has a high theoretical specific capacity, the theoretical specific capacity can reach 130mAh/g 1

Tags :

Al-Clad CR2032 Coin Cell Case (20d x 3.2mm) for Li-ion Battery

This is a special CR2032 coin cell case with Aluminum coated on the inside and outside of the positive can (60pcs/pack). It can tolerate polarization of higher voltages (up to 5.5V) due to the passivation of cladding by electrolyte component (especially LiPF6 based electrolyte system) to form a layer of AlF3. This AlF3 layer is 1

Tags :

In-situ Analytical Split Test Cell for Lithium/Zinc Air Battery

It contains a quartz observation window on the bottom which allows in-situ X-Ray analysis of battery material phase transition during charging and discharging process. Two needle valves allow you control air flow pressure and its splittable design provides you the most convenient way to test various anode and cathode materials. It's1

Tags :

precision semi-automatic die cutter for pouch cell electrode sheets

AOT-MSK-180-N is a precision semi-automatic die cutter for pouch cell electrode sheets (Max. 200mm L x 200mm W). It is an updated version of MSK-180 with more stability and better accuracy at reducing the burrs and powder-shedding of the electrode sheets.

Tags :

Heavy Duty Disc Cutter with 4 Sets Die For Coin Cell Battery

AOT-MSK-T-06 is a precision disc cutter with max. the pressure of 600kN. This tool is manually operated and is designed for cutting round discs from a thin metal sheet/foil in the range from 0.01 mm

Tags :

Precision Disc Cutter with Standard 16, 19, 20 Dia

AOT-MSK-T-10 is a compact disc cutter with quality sliding rail with ball bearing for precision cutting. It can be easily placed into a glove box with a transition chamber diameter larger than 230mm.

Tags :

20um Battery Separator Polypropylene PE Film Battery Membranes

The PE separator for lithium batteries is made of polypropylene material and features a micro-porous structure. It can isolate the positive and negative electrodes to prevent short.

Tags :

Compact Disassembling Cutter Machine for 18650 Cylindrical Cases

MSK-530B cylindrical battery disassembling machine is a specialized machine designed for laboratory analysis of the internal state of cylindrical batteries. Different specifications of molds can be selected to disassemble cylindrical batteries of different models. Max: Diameter 50mm x Length 100mm; Min: Diameter 5mm x Length 40mm; This device uses 1

Tags :