Coin Cell Testing Equipment Suppliers,Coin Cell Testing Equipment Manufacturers

Vacuum Sealing Machine for Top and Side Vacuum Standing, Sealing, Purging for Pouch Cell Battery

AOT-MSK-115A is a 4 in 1 small heat sealing machine. Mainly have the following functions: side seal; purge; vacuum stand; and vacuum seal.

Tags :

Desktop Constant Temperature Test Chamber and Button Battery Charge and Discharge Tester

AOT-MHW-25-S-16CH it is mainly used in the desktop constant temperature test box for pouch cell battery & button battery laboratory testing. It is more suitable for small-scale research and development and experimentation. It occupies less than half a square meter, freeing up more desktop space, and can observe the experiment situation in the b1

Tags :

Coating Adhesion Tester For Battery Electrode Performance Testing

AOT-QFZ is a coating adhesion tester is used to measure the adhesion ability of various coating films to the surface of the object to be coated. The adhesion performance of the paint film was measured by the circle track method, and the integrity of the paint film within the scratch range of the circle rolling line was used to evaluate the adhesion1

Tags :

NASICON Na3Zr2Si2PO12 Solid State Cell Electrolyte Powder Materials For Sodium Battery

NASICON Na3Zr2Si2PO12 solid state cell electrolyte powder materials for sodium battery,good stability for metallic sodium and liquid electrolyte.

Tags :

Automatic Stacking Machine For Pouch Cell Electrode

This stacking equipment is suitable for assembling the positive and negative plates of lithium-ion battery cells with Z-shaped laminations and isolation membranes.

Tags :

Three-electrode Sealed electrodes Electrolytic Cell for Laboratory

Tags :

Battery Electrode Split Test Cell with Be Window

AOT-EQ-STC-BEW battery can accommodate electrodes and separators of various sizes (diameter 19, 20, and 24mm). It is designed for simple and rapid assembly testing of rechargeable battery electrode materials.

Tags :

Sodium Battery Material Sodium Metal Chips For Coin Cell Raw Material

It is specially designed for button batteries (2032, 2025, 2016) to use composite sodium sheets, with a diameter of 15.6mm, a thickness of 0.4~0.5 mm, and a purity of more than 99.7%.

Tags :

4680 Battery Case Cylinder Cell Case for Lithium Battery

Tags :

Battery Anode Material Potassium Metal Chips For Lab Reseaarch

99.7% High Purity Electrode Potassium Metal Chips For CR2032 2025 2016 Coin Cell Case.

Tags :

potassium metal chips for coin cell

99.7% High Purity Electrode Potassium Metal Chips For CR2032 2025 2016 Coin Cell Case.

Tags :

Lithium Battery Aluminium Foil Coating Machine with Vacuum Pump and Dryer

description： The battery coating machine is a device specially used for uniformly coating the surface of the positive and negative electrode materials of the battery. It enables precise control of coating thickness and speed to ensure the stability of coating quality and performance. In the lithium battery production process, the battery coating ma1

Tags :