12 M Pe Separator

Celgard M824 Separator M824 Film For Battery Cell Lab Research Battery Grade

Product Benefits: Zero TD shrinkage reduces internal shorting Uniform pore structure with high chemical & thermal stability High porosity for excellent high-rate performance PP outer layer provides high temperature melt integrity, oxidation resistance PE inner layer provides high-speed shutdown features Offers exceptional safety and longevity f1

Tags :

Lithium battery coaxial double cylinder structure SSR viscometer (special for small samples) is suitable for 7ml-13ml

A new LV-SSR Brinell rotary viscometer adopts high performance stepping motor and driver, which runs accurately and smoothly according to the program setting, and the motor runs through the torque sensor to drive the rotor to rotate at constant speed. When the rotor is subjected to viscous resistance in the measured liquid, the force is fed back to1

Tags :

Double Dispersed Axis Vacuum Planetary Mixer For Lithium Battery

MSK-SFM-9-5L dual dispersing shaft vacuum planetary mixer is an efficient mixing device that integrates low-speed mixing and high-speed dispersion. It combines orbital and rotational motion to achieve thorough mixing of materials.

Tags :

Aotelec hot sell KBF1400-Q atmosphere box furnace

The battery box furnace plays an important role in the production process of a variety of batteries such as lithium batteries, and heat treats the positive or negative materials of lithium batteries to make the batteries.

Tags :

LLZNO-500NM Lithium Lanthanum Zirconium Niobium Oxide Lithium ion Solid Electrolyte Powder

LLZNO-500NM Lithium Lanthanum Zirconium Niobium Oxide Lithium ion Solid Electrolyte Powder.

Tags :

Laboratory Electric Pellet hydraulic press machine(20-60T Optional)

AOT-MD-2060(20T-60T Optional) With the characteristics of precise and adjustable pressure, convenient and efficient operation, good molding quality, etc.

Tags :

AOT-AFA-EI300 Scraper Three Roll Transfer Battery Coating Machine

AOT-AFA-EI300 scraper three roll transfer coating machine, roll to roll method, continuous and intermittent coating, width 300mm, coating width 50-260mm, coating surface density accuracy ± 1.5%, 150 ℃ hot air oven, suitable for 8-30 μ m thick metal substrates, including slurry stirring, winding correction function, optional NMP treatment and plasma1

Tags :

Solid-state Batteries Test Fixture

The M-ISS-B16 solid-state button type battery device is a specialized testing device for solid-state batteries. The fixture consists of an upper pressure rod, a lower pressure rod, a cavity, and a seal. The fixture can be used with our MSK-YLJ-MA5T electric press for solid-state powder pressing, or with our S-MS-P500 solid-state battery pressure te1

Tags :

Lab Coater Coating Machine for 18650 Cylindrical Battery Lithium Ion Dryer Equipment

AOT-TBJ-180C is a small roll-to-roll coater for laboratory research, because it can coat continuously, it is suitable for pilot scale battery research work in colleges, universities and factories.

Tags :

Single-Channel Potentiostat /Galvanostat For Battery Test

Potentiostat/Galvanostat/FRA/ZRA Maximum Current: ±2A Current range: ±2nA ~2A, 10 ranges Applied Potential: ±10V(can be customized to ±12V) Compliance voltage: ±21V Built-in EIS/FRA, EIS range: 10μHz~1MHz Potential/current accuracy: 0.1% of the range Potential resolution: 10μV; current resolution 1pA IR compensation; Current can be ±20A/40A/101

Tags :

10-Ton Benchtop Heated Lab Press with Dual Flat Heating Plates

The AOT benchtop 10T manual hydraulic heated lab press is designed for heated pressing of polymer, ceramic powder and electrode/membrane films.

Tags :

20um Battery Separator Polypropylene PE Film Battery Membranes

The PE separator for lithium batteries is made of polypropylene material and features a micro-porous structure. It can isolate the positive and negative electrodes to prevent short.

Tags :