Search Electrode At Www.aotelec.com

Hand-Held Coin Cell Disc Cutter Tool for Lab Electrode Cutting

AOT-T-12 hand-held disc cutter is a cost-effective lab tool for cutting round lithium battery electrode disc up to 0.3 mm thickness.

Tags :

200mm Hot Rolling Press Machine for Battery Electrode Calendering

Lab roller press machine with heat function suitable for increasing active material density of the battery electrode.

Tags :

300mm Continuous Battery Electrode Coating Machine for Manufacturing

The continuous experimental battery electrode coating machine is specially used for coating the surface of the Al foil and copper foil.

Tags :

Lab Compact Manual Roller Press for Battery Electrode Sheet Calendering

This lab rolling press machine is an ideal calender for adjusting thickness and increasing active material density of the electrode in Li-Ion batteries research after coating and drying.

Tags :

Lithium sulfur battery carbon sulfur composite positive double-sided electrode plate

Lithium-sulfur battery is the next generation of high energy density electrochemical energy storage device, the carbon and sulfur composite positive electrode double-sided electrode plate is the key component to improve its performance. This electrode sheet uses advanced carbon-sulfur composite technology to effectively compound highly conductive c1

Tags :

Heat Roller Press Machine For Battery Electrode Sheet Calendering With Winding System

1.This Roll Press Machine is a continuous roll to roll heat calendering machine . It has dual rollers of 150mm dia. x 300mm width and dual micrometer. The roll press machine is an ideal hot rolling press for adjusting thickness and increasing active material density of the electrode in Li-Ion batteries research after coating and drying. 21

Tags :

NMC622 Single Side Coated Aluminum Foil for Battery Cathode Electrode Sheet

Reference for the use of Electrode Sheet: ①Electrode sheet cutting: AOT-DC-80 Cutting machine Recommended size of button electrode sheet: 12mm/14mm diameter. ②Pole piece weighing: AOT series balance active substance formula: active substance mass = (pole piece mass (mg) - disc area (cm2) * collector surface density (mg/cm2) * active substance propo1

Tags :

Lithium Battery Electrode Substrate Material Nickel Foam

Nickel Foam For Lithium Battery Electrode Substrate Material

Foam nickel is a kind of porous metal with three-dimensional full through mesh structure, which is made of foam like metal nickel through high-tech deep processing.

Tags :

Battery Electrode Split Test Cell with Be Window

AOT-EQ-STC-BEW battery can accommodate electrodes and separators of various sizes (diameter 19, 20, and 24mm). It is designed for simple and rapid assembly testing of rechargeable battery electrode materials.

Tags :

Graphite Coated Copper Foil for Lab Battery Anode Electrode Sheets

This graphite coated copper foil is specially use for lithium ion battery anode electrode sheets.

Tags :

Ti Metal Foam For Lithium Electrolytic Electrode Material

Titanium Metal Foam For Electrolytic Electrode Material

Titanium foam with high purity titanium powder as raw material, after screen, cold isostatic pressing molding, high temperature, high vacuum sintering.

Tags :

Coating Adhesion Tester For Battery Electrode Performance Testing

AOT-QFZ is a coating adhesion tester is used to measure the adhesion ability of various coating films to the surface of the object to be coated. The adhesion performance of the paint film was measured by the circle track method, and the integrity of the paint film within the scratch range of the circle rolling line was used to evaluate the adhesion1

Tags :