Sodium Metal Chips For Coin Cell Suppliers,Sodium Metal Chips For Coin Cell Manufacturers

Kuraray YP-80F Activated Carbon Powder for Supercapacitor

Kuraray YP-80F Activated Carbon Powder features a large specific surface area, reasonable pore size distribution, low ash and moisture content.

Tags :

Sodium Nickel-Manganese Oxide for Sodium Battery Cathode Material

Sodium Nickel-Manganese Oxide breaks the traditional sodium battery voltage range limit of 2-4V and can be charged up to 4.2V, greatly improving the energy density.

Tags :

Roll-to-Roll Hot Laminator for Tri-Layer Composite

AOT-MSK-BSL-H200 is a roll-to-roll hot laminator for forming trilayer composite. The protection layers can be used to protect the lamination layers during rolling press and then being removed after press.

Tags :

Sodium Battery Lithium Battery Slurry Resistance Tester

AOT-BSR2300 use the upper, middle and lower three pairs of electrodes to test the resistivity of the slurry at different vertical heights, evaluate the conductivity of different formulations of slurry and the settlement performance with the standing time.

Tags :

Metal Nickel Strip Cutting Machine For Battery Tab Cutting

AOT-YS-100 Nickel Cutting Machine is mainly used for all kinds of metal and no-metal strip materials, such as copper foil, Aluminum Foil, copper foil tape, batteries nickel belt and so on.

Tags :

Pneumatic Slitting Machine for Pouch Cell Case Cutting

AOT-MSK-121-MC is a pneumatic slitter for pouch cell case cutting. The pouch cell case was loaded with a fixture for cutting with defined size.

Tags :

Compact Disassembling Cutter for 18650 Cylindrical Cases (Optional for 21700, 26650 or 32650)

AOT-MSK-530 is a compact manually-operated machine for disassembling cylinder cases in the battery R&D lab. The compact body design allows easy operation inside a glove box to preserve & prevent the electrolyte and active materials from contamination during case disassembling. Simple operation with a safety protection cover

Tags :

Desk-top Semi-Auto Grooving Machine for Various Cylinder Cell

MSK-500 Series is semi-auto grooving machine. It is used for grooving various cylindrical cases including CR123,18650,21700,26650, 32650 and AA.

Tags :

Peel Strength Tester for Battery Electrodes

AOT-MSK-TE602-PS is lab-scale peel strength tester for battery electrodes or other thin-films. It equips a temperature control unit to enable testing under different temperatures.

Tags :

Automatic Pouch Cell Stacking Machine For Lithium Battery

AOT- MSK-111A-PEM automatic stacking machine is a multifunctional stacking device that can be applied to ordinary lithium-ion batteries and metal lithium-ion batteries with Z-shaped separators, as well as solid-state batteries with sheet structure separators.

Tags :

16 Channels High Throughput Coin Cell Crimping Machine

AOT-MSK-HT-64 is a 16-channel high-throughput automatic Crimper for CR2016, CR2025, and CR2032 coin cells. It can process 16 coin cells within 15 minutes with pre-loaded components.

Tags :