Pouch Cell Die Cutter Suppliers,Pouch Cell Die Cutter Manufacturers

Al-Clad CR2032 Coin Cell Case (20d x 3.2mm) for Li-ion Battery

This is a special CR2032 coin cell case with Aluminum coated on the inside and outside of the positive can (60pcs/pack). It can tolerate polarization of higher voltages (up to 5.5V) due to the passivation of cladding by electrolyte component (especially LiPF6 based electrolyte system) to form a layer of AlF3. This AlF3 layer is 1

Tags :

In-situ Analytical Split Test Cell for Lithium/Zinc Air Battery

It contains a quartz observation window on the bottom which allows in-situ X-Ray analysis of battery material phase transition during charging and discharging process. Two needle valves allow you control air flow pressure and its splittable design provides you the most convenient way to test various anode and cathode materials. It's1

Tags :

Lab Flatbed Coating Machine

MSK-AFA-PD200 flatbed coating machine, equipped with extrusion coating mold, linear plunger feeding, minimum material loss of about 18ml, maximum coating size of 200x300mm, can be used in a glove box, suitable for low viscosity less than 1000mPa. s, coating thickness accuracy of ± 1 μ m, can be optionally coated with scraper, wire rod, and four sid1

Tags :

precision semi-automatic die cutter for pouch cell electrode sheets

AOT-MSK-180-N is a precision semi-automatic die cutter for pouch cell electrode sheets (Max. 200mm L x 200mm W). It is an updated version of MSK-180 with more stability and better accuracy at reducing the burrs and powder-shedding of the electrode sheets.

Tags :

Laboratory Pouch Cell Making Case Forming Machine for Aluminum Laminated Film

This compact pouch case forming machine is suitable forpouch cell case forming of aluminumlaminated film of flexible packaging lithium battery, driven by pneumatic.

Tags :

Narrow Slit Extrusion Laboratory Coating Machine

AOT-AFA-SD300 narrow slit extrusion coating machine, roll to roll method, continuous and intermittent coating, width 300mm, coating width 50-260mm, optional extrusion coating die head, coating surface density accuracy ± 1.5%, 150 ℃ hot air oven, suitable for 8-30 μ m thick metal substrates, optional NMP treatment and feeding device.

Tags :

Pure Nickel Metal Fiber Felt for Fuel Cells Battery

Nickel fiber felt is a type of fiber felt made of pure nickel metal, which has continuous three-dimensional mesh holes. It can achieve extremely high porosity and pore size.

Tags :

Heavy Duty Disc Cutter with 4 Sets Die For Coin Cell Battery

AOT-MSK-T-06 is a precision disc cutter with max. the pressure of 600kN. This tool is manually operated and is designed for cutting round discs from a thin metal sheet/foil in the range from 0.01 mm

Tags :

Precision Disc Cutter with Standard 16, 19, 20 Dia

AOT-MSK-T-10 is a compact disc cutter with quality sliding rail with ball bearing for precision cutting. It can be easily placed into a glove box with a transition chamber diameter larger than 230mm.

Tags :

Compact Disassembling Cutter Machine for 18650 Cylindrical Cases

MSK-530B cylindrical battery disassembling machine is a specialized machine designed for laboratory analysis of the internal state of cylindrical batteries. Different specifications of molds can be selected to disassemble cylindrical batteries of different models. Max: Diameter 50mm x Length 100mm; Min: Diameter 5mm x Length 40mm; This device uses 1

Tags :