Lithium Vanadium Phosphate Material Suppliers,lithium Vanadium Phosphate Material Manufacturers

Digital Single Channel Pipette Filler For Coin Cell Battery

AOT-200UL is an ergonomic, intuitive electronic pipette made in Germany used for dispensing electrolyte (LiPF6 for Li-ion Battery) to small Coin Cells from battery research and material coating for Spin Coating in most material research lab.

Tags :

Pipetting Devices For Battery Laboratory Research

The pipettes cover volume range of 0.1μl to 10ml

Tags :

Carbon Coated Aluminum Foil for Lithium Battery

Carbon-coated aluminum foil is a new type of battery cathode substrate. carbon-coated aluminum foil has good conductivity, low internal resistance and strong mechanical properties.

Tags :

Graphite Coated Copper Foil Electrode Disk for Coin Cells

AOT- GCEDis a Diameter 19 pre-cut graphite coated copper foil for CR20XX coin cell battery and split testing cells.

Tags :

Hot Melt Adhesive Polymer Tape for Heat Sealing Pouch Cell Tabs

Hot Melt Adhesives Polymer Tapes)for Heat Sealing Pouch Cells. This hot melt adhesive/sealant is specially designed to seal labels between aluminum laminated film pouch battery compartments.

Tags :

100V 10A Charge 20A Discharge Battery Pack Testing Aging Machine

This aging cabinet is mainly used to test the charge and discharge cycles of lithium batteries. The test items mainly include: battery charging protection voltage, discharge protection voltage, capacity, etc. The equipment has four test steps: charging, discharging, shelving, and cycling. Test the battery according to the set process by editing the1

Tags :

10 Channels Cylindrical Battery Sorting Machine For Battery Pack

This equipment is equipped with high precision internal resistance, voltage and automatic test system. According to the set internal resistance voltage value, the battery can be accurately sent to the specified gear.

Tags :

Acrylic Glove Box With Pressure Gauge For Battery Research

This equipment is mainly composed of three parts, namely the main box, the transfer room and the side door. There are 2 glove ports. In front of the main vacuum glove box, the inside of the box can be clearly seen. Can also be customized according to customer requirements.

Tags :

Grade Sodium Metal Chips For Coin Cell Raw Material

It is specially designed for button batteries (2032, 2025, 2016) to use composite sodium sheets, with a diameter of 15.6mm, a thickness of 0.4~0.5 mm, and a purity of more than 99.7%.

Tags :

Planetary Vacuum Mixer For Lithium Battery Laboratory Research

AOT-MSK-SFM-2L is a Tri-Shaft Planetary Vacuum Mixer with a 2-liter container and PLC Touch Panel Control. Such a vacuum mixer incorporates the unique tri-shaft stirring design to ensure a gas-bubble free blending of complex materials under vacuum with extreme uniformity.

Tags :

Stacking Machine For Lithium Ion Battery

Lab Manual Pouch Cell Stacking Machine

AOT-DP200 battery stacking machine is a manual laminating machine. It is an ideal tool for stacking multiple layers of positive & negative electrode and separator for pouch cell battery. This is used for lithium battery stacking process, put the cathode, anode electrode and battery separator Z shaped lamination.

Tags :

Battery Electrode Slitter Slitting Machine

Semi-automatic Battery Slitting Machine for Pouch Cell Battery

AOT-MSK-300is a semi-automatic roll slitting machine for preparing electrode of cylinder batteries and pouch cell in laboratories.Eelectric slitting machine can be applied to the precise slitting process of positive and negative plates of lithium ion batteries. Sheet feeding, upper and lower circular knife slitting, electric drive,1

Tags :