Li7la3zr2o12 For Solid Materials Suppliers,li7la3zr2o12 For Solid Materials Manufacturers

Lab Battery Slurry Vacuum Film Coating Machine with Dryer

Vacuum film coating machine is widely used in various high temperature coating process, such as ceramic film, crystal film, battery electrode, special nano film

Tags :

LiCl Anhydrous Lithium Chloride Powder for Solid State Electrolyte

Lithium Chloride (LiCl) Powder is a kind of battery-grade precursor to systhesize Li-based solid-state electrolyte. It has advantages such as high specific capacity and high voltage difference, which effectively enhance the power performance of the battery.

Tags :

Lithium battery coaxial double cylinder structure SSR viscometer (special for small samples) is suitable for 7ml-13ml

A new LV-SSR Brinell rotary viscometer adopts high performance stepping motor and driver, which runs accurately and smoothly according to the program setting, and the motor runs through the torque sensor to drive the rotor to rotate at constant speed. When the rotor is subjected to viscous resistance in the measured liquid, the force is fed back to1

Tags :

Battery cathode material Na3V2(PO4)202F

Na3V2(PO4)202F material has good structural stability and can maintain a high capacity retention rate after multiple charge and discharge cycles, which can extend the service life of the battery and reduce the use cost. Sodium vanadium fluorooxyphosphate has a high theoretical specific capacity, the theoretical specific capacity can reach 130mAh/g 1

Tags :

Lab Flatbed Coating Machine

MSK-AFA-PD200 flatbed coating machine, equipped with extrusion coating mold, linear plunger feeding, minimum material loss of about 18ml, maximum coating size of 200x300mm, can be used in a glove box, suitable for low viscosity less than 1000mPa. s, coating thickness accuracy of ± 1 μ m, can be optionally coated with scraper, wire rod, and four sid1

Tags :

LLZNO-500NM Lithium Lanthanum Zirconium Niobium Oxide Lithium ion Solid Electrolyte Powder

LLZNO-500NM Lithium Lanthanum Zirconium Niobium Oxide Lithium ion Solid Electrolyte Powder.

Tags :

Laboratory Pouch Cell Making Case Forming Machine for Aluminum Laminated Film

This compact pouch case forming machine is suitable forpouch cell case forming of aluminumlaminated film of flexible packaging lithium battery, driven by pneumatic.

Tags :

AOT-AFA-EI300 Scraper Three Roll Transfer Battery Coating Machine

AOT-AFA-EI300 scraper three roll transfer coating machine, roll to roll method, continuous and intermittent coating, width 300mm, coating width 50-260mm, coating surface density accuracy ± 1.5%, 150 ℃ hot air oven, suitable for 8-30 μ m thick metal substrates, including slurry stirring, winding correction function, optional NMP treatment and plasma1

Tags :

Solid-state Batteries Test Fixture

The M-ISS-B16 solid-state button type battery device is a specialized testing device for solid-state batteries. The fixture consists of an upper pressure rod, a lower pressure rod, a cavity, and a seal. The fixture can be used with our MSK-YLJ-MA5T electric press for solid-state powder pressing, or with our S-MS-P500 solid-state battery pressure te1

Tags :

5um Batteries Insulation Materials PE Separator Film

Lithium battery PE separator is made of polypropylene as the base material and forms a uniform microporous structure through processes such as biaxial stretching.

Tags :

Lithium Ion Battery PE Poly 14um Polypropylene Film Separator

The functional film mainly made of polyethylene (PE) plays a key role in physically isolating the positive and negative electrodes to prevent short circuits.

Tags :