AOT-DF160 electric hydraulic sealing machine is mainly used in laboratory battery material research and development for the preparation of samples, capacitors scientific research sealing, can also be used in factory small batch trial production. The electric method saves effort, and different molds can also be used for dry powder pressing sheet, we1
This electronic balances are used in the food, pharmaceutical, textile ext .geological and jewellery industries, they are widely used in schools, hospitals, laboratories, medical, chemical and other large factories.
The battery explosion-proof test chamber is mainly used to protect the safety of the operator and the instrument during the battery safety performance test. In the charge and discharge test, the battery is placed in the explosion-proof box and an external charge and discharge tester is connected.
AOT-MSK-131 provides a uniform pressure load and temperature environment for the tested pouch cells for more efficient and high-quality SEI formation. This hot press has precise and constant pressure delivery up to 400 kg and the maximum temperature is 150°C.
The experimental drum ball mill is an ultra-fine grinding and mixing equipment for laboratory and small batch production. The machine is compact in structure, convenient in operation, high in work efficiency and uniform in grinding particle size. It is the preferred equipment for scientific research, teaching, testing and production. It can be wide1
This is a simple lab line for coin cell research, If you don't have much budget, we also have another lab line with low cost by changing some small equipment.
AOT company has a full range of lithium ion battery products series:lithium ion battery(Al shell,polymer,cylindrical,energy storage,bike motive,Electric Vehicle,PACK battery),material,equipment.We provide you with a technology improvement program!
DDS-307 series conductivity meter is rapid determination of water quality. Mainly used in environmental testing, water quality testing, laboratory research, etc.
This ball mill can mix products of different particle sizes and materials by dry and wet grinding, and the minimum particle size of the ground products can reach 0.1 microns (ie 1.0 × 10 mm-4).
AOT-HPS-200H is mainly suitable for hot flat pressing after the battery core is wound. First, place the wound cell on the template, and shape the cell by pressing and heating, so that the thickness of the cell is consistent, the elasticity of the cell is reduced, and the short-circuit rate of the cell is reduced.