Fuel Cells Battery Material Suppliers,Fuel Cells Battery Material Manufacturers

Cylinder Battery Cell Single Point Pneumatic Spot Welder

AOT-MSK330A is mainly used for welding the cylinder core's negative terminal (Nickel tab) to the bottom of the cylinder case. It can also be applied to welding processes for nickel hydrogen, nickel chromium, and various lithium-ion batteries.

Tags :

Cylinder Battery High-Frequency Inverter Spot Welding Machine

This machine is controlled by a microcomputer single-chip microcomputer. The welding operation is programmed, with beautiful weld points, small sparks.

Tags :

Compact Disassembling Cutter Machine for 18650 Cylindrical Cases

MSK-530B cylindrical battery disassembling machine is a specialized machine designed for laboratory analysis of the internal state of cylindrical batteries. Different specifications of molds can be selected to disassemble cylindrical batteries of different models. Max: Diameter 50mm x Length 100mm; Min: Diameter 5mm x Length 40mm; This device uses 1

Tags :

15KV-50KV Battery Hi-Pot Tester for Insulation Breakdown and Destructive Testing

The RK2674 series withstand voltage tester is an instrument for measuring the withstand voltage strength.

Tags :

5KV Battery Hi-Pot Tester for Insulation Breakdown and Destructive Testing

The RK2672 series withstand voltage tester is an instrument for measuring the withstand voltage strength.

Tags :

Kuraray Activated Carbon Powder YP-50F for Lab Battery Raw Material

Kuraray YP-50F activated carbon powder has a well-developed pore structure, a large specific surface area, strong adsorption capacity and can efficiently adsorb various substances.

Tags :

Kuraray YP-80F Activated Carbon Powder for Supercapacitor

Kuraray YP-80F Activated Carbon Powder features a large specific surface area, reasonable pore size distribution, low ash and moisture content.

Tags :

Sodium Nickel-Manganese Oxide for Sodium Battery Cathode Material

Sodium Nickel-Manganese Oxide breaks the traditional sodium battery voltage range limit of 2-4V and can be charged up to 4.2V, greatly improving the energy density.

Tags :

Lithium Battery Protection Board Tester BMS Tester

It is mainly used for the safety test of lithium battery protection board, and is compatible with various common protection board types.

Tags :

300W Outdoor Portable Mobile Energy Storage Power Supply Energy Storage Battery

This portable energy storage battery can charge and supply power for a variety of electrical equipment, multiple units are charged at the same time.

Tags :

AOT-TB-616 Spin coater /High precision spin coater

High-precision spin coater used in liquid, surface film for silicon wafers, glass, ceramics and plate surface coater process.

Tags :

Sodium Battery Lithium Battery Slurry Resistance Tester

AOT-BSR2300 use the upper, middle and lower three pairs of electrodes to test the resistivity of the slurry at different vertical heights, evaluate the conductivity of different formulations of slurry and the settlement performance with the standing time.

Tags :