Electrode Rolling Press Suppliers,electrode Rolling Press Manufacturers

Semi-Automatic Battery Stacking Machine for Pouch Cell

This equipment is mainly used for zigzag laminations of square lithium-ion power battery cells.

Tags :

Conductive Carbon Coated Copper Foil For Lithium ion Battery lab Research

Conductive carbon-coated copper foil can replace conventional Al foil as a better anode substrate with improved properties.

Tags :

Graphite Coated Copper Foil Electrode Disk for Coin Cells

AOT- GCEDis a Diameter 19 pre-cut graphite coated copper foil for CR20XX coin cell battery and split testing cells.

Tags :

Acrylic Glove Box With Pressure Gauge For Battery Research

This equipment is mainly composed of three parts, namely the main box, the transfer room and the side door. There are 2 glove ports. In front of the main vacuum glove box, the inside of the box can be clearly seen. Can also be customized according to customer requirements.

Tags :

Stacking Machine For Lithium Ion Battery

Lab Manual Pouch Cell Stacking Machine

AOT-DP200 battery stacking machine is a manual laminating machine. It is an ideal tool for stacking multiple layers of positive & negative electrode and separator for pouch cell battery. This is used for lithium battery stacking process, put the cathode, anode electrode and battery separator Z shaped lamination.

Tags :

Battery Electrode Slitter Slitting Machine

Semi-automatic Battery Slitting Machine for Pouch Cell Battery

AOT-MSK-300is a semi-automatic roll slitting machine for preparing electrode of cylinder batteries and pouch cell in laboratories.Eelectric slitting machine can be applied to the precise slitting process of positive and negative plates of lithium ion batteries. Sheet feeding, upper and lower circular knife slitting, electric drive,1

Tags :

Electric Hot Rolling Press with Variable Speed (Ar Gas Compatible)For Lab

AOT-MSK-HRP-01 is a compact hot rolling cylinder press, max. The working temperature is 100℃. It is specially designed for preparing battery electrodes inside and outside the glove box. It is compatible with Ar gas. In lithium-ion battery research, applications such as increasing the density of electrode active materials after coating are very effe1

Tags :

Mandrel Bending Tester for Flexible Battery Electrode Testing

AOT-MBT-12-LD is suitable for testing the flexibility of battery electrode sheets or films. It is a manually operated mandrel bending tester with 12 cylinders of various sizes, including 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 25, 32mm diameter.

Tags :

Precision Die Cutter for Pouch Cell electrode Sheet

AOT-MSK-180 is a CE certified precision electrode die-cutting machine that accepts size customization. It is a must-have tool for producing specific shapes of positive and negative electrodes with current collectors in pouch cell production lines. IR sensor built into the front of the machine for safe operation.

Tags :

Pneumatic Hot-Press for Pouch Cell SEI Formation

AOT-MSK-131 provides a uniform pressure load and temperature environment for the tested pouch cells for more efficient and high-quality SEI formation. This hot press has precise and constant pressure delivery up to 400 kg and the maximum temperature is 150°C.

Tags :

Zinc Chips Zinc ion Battery Anode Electrode Chips

Zinc metal chips has excellent properties such as high capacity, non-toxicity, relatively low redox potential (-0.76V vs SHE), high safety, and low cost, and has been considered as an ideal anode material for primary and secondary zinc batteries.

Tags :