Current Collector Anode Foils Suppliers,Current Collector Anode Foils Manufacturers

Conductive Carbon Coated Copper Foil For Lithium ion Battery lab Research

Conductive carbon-coated copper foil can replace conventional Al foil as a better anode substrate with improved properties.

Tags :

Carbon Coated Aluminum Foil for Lithium Battery

Carbon-coated aluminum foil is a new type of battery cathode substrate. carbon-coated aluminum foil has good conductivity, low internal resistance and strong mechanical properties.

Tags :

Graphite Coated Copper Foil Electrode Disk for Coin Cells

AOT- GCEDis a Diameter 19 pre-cut graphite coated copper foil for CR20XX coin cell battery and split testing cells.

Tags :

Battery Forced Internal-Short Circuit Tester

Battery Forced Internal Short Circuit (ISC) Tester

AOT-MSK-ISC is a highly integrated three-in-one battery ISC test system, which can simulate actual tests, and can measure battery voltage, temperature, humidity, and crushing pressure under various environmental conditions.

Tags :

Copper Mesh Foil for Battery Anode Substrate

Lithium battery current collector copper mesh can improve battery energy density.

Tags :

Zinc Chips Zinc ion Battery Anode Electrode Chips

Zinc metal chips has excellent properties such as high capacity, non-toxicity, relatively low redox potential (-0.76V vs SHE), high safety, and low cost, and has been considered as an ideal anode material for primary and secondary zinc batteries.

Tags :

Soft Carbon Powder For Sodium Ion Battery

Sodium Ion Battery Anode Material Soft Carbon Powder

Soft carbon has adjustable layer spacing and good electronic conductivity, and can be used for sodium battery and lithium battery，it is a common sodium battery material.

Tags :

PET Based New Composite Copper Foil For Battery Anode Substrate

Compared with traditional copper foil, PET substrate has good safety performance, light weight, and good ductility, which can help improve the energy density of batteries.

Tags :

PET Composite Aluminum Foil For Lithium Battery

Composite aluminum foil is a new-type of battery current collector, which has thinner aluminum film, overall lighter weight, and higher safty during penetration expeirment compared to the conventional rolling aluminum foil.

Tags :

Lithium Battery Anode Material LiDFOB Poweder For Lab Research

Lithium difluorooxalate borate is a white powder or crystal powder, similar to LiBOB. Li+ in LiODFB has a quintuple coordination structure, which easily combines with other molecules to form a regular octahedral coordination structure, and can absorb moisture in air to form LiODFB·H2O. Nowadays, the research of lithium-ion battery is hot, and the c1

Tags :

Single-Channel Potentiostat /Galvanostat For Battery Test

Potentiostat/Galvanostat/FRA/ZRA Maximum Current: ±2A Current range: ±2nA ~2A, 10 ranges Applied Potential: ±10V(can be customized to ±12V) Compliance voltage: ±21V Built-in EIS/FRA, EIS range: 10μHz~1MHz Potential/current accuracy: 0.1% of the range Potential resolution: 10μV; current resolution 1pA IR compensation; Current can be ±20A/40A/101

Tags :