Lithium difluorophosphate is an inorganic compound with the chemical formula LiPO₂F₂. This substance mainly appears as a white powdery solid, with a melting point higher than 300°C, a density of 1.979g/cm³, and a solubility of 40324mg/L at 20°C. Its vapour pressure is 0.000000145Pa at 25°C and 298K. Lithium difluorophosphate has a wide range of app1
Lithium bistrifluoromethylsulfonimide is a white crystal or powder that has good thermal stability and begins to decompose when heated to 360 ° C. It has high electrochemical stability and conductivity, and has corrosion effect on aluminum collector at high voltage (above 4.2V). Therefore, it is often used as a lithium ion battery, organic electrol1
Lithium-sulfur battery is the next generation of high energy density electrochemical energy storage device, the carbon and sulfur composite positive electrode double-sided electrode plate is the key component to improve its performance. This electrode sheet uses advanced carbon-sulfur composite technology to effectively compound highly conductive c1
Lithium Chloride (LiCl) Powder is a kind of battery-grade precursor to systhesize Li-based solid-state electrolyte. It has advantages such as high specific capacity and high voltage difference, which effectively enhance the power performance of the battery.
Na3V2(PO4)202F material has good structural stability and can maintain a high capacity retention rate after multiple charge and discharge cycles, which can extend the service life of the battery and reduce the use cost. Sodium vanadium fluorooxyphosphate has a high theoretical specific capacity, the theoretical specific capacity can reach 130mAh/g 1
AOT-MC-540(5T-40T Optional) It is easy to operate and can be used without complex training, and users can flexibly adjust the pressure according to actual needs to adapt to the characteristics and pressing requirements of different powder materials
Water based zinc ion battery positive electrode sheet, coated with active material (manganese based or vanadium based) On the surface of the current collector, pole pieces are made by rolling, die-cutting, etc., with high loading capacity, controllability, good processability, and adjustable pole piece parameter size.
AOT-SFM-18 the vacuum mixer has a beautiful appearance, compact size, good mixing uniformity, and is convenient and easy to use. The planetary four blade vacuum mixer is an efficient mixing equipment that integrates vacuum mixing and dispersion. It can be applied to various solvent and powder mixing processes, such as the batching process of lithiu1