Spot Welder For Pouch Cell Suppliers,Spot Welder For Pouch Cell Manufacturers

In-situ Analytical Split Test Cell for Lithium/Zinc Air Battery

It contains a quartz observation window on the bottom which allows in-situ X-Ray analysis of battery material phase transition during charging and discharging process. Two needle valves allow you control air flow pressure and its splittable design provides you the most convenient way to test various anode and cathode materials. It's1

Tags :

Lab Flatbed Coating Machine

MSK-AFA-PD200 flatbed coating machine, equipped with extrusion coating mold, linear plunger feeding, minimum material loss of about 18ml, maximum coating size of 200x300mm, can be used in a glove box, suitable for low viscosity less than 1000mPa. s, coating thickness accuracy of ± 1 μ m, can be optionally coated with scraper, wire rod, and four sid1

Tags :

precision semi-automatic die cutter for pouch cell electrode sheets

AOT-MSK-180-N is a precision semi-automatic die cutter for pouch cell electrode sheets (Max. 200mm L x 200mm W). It is an updated version of MSK-180 with more stability and better accuracy at reducing the burrs and powder-shedding of the electrode sheets.

Tags :

Laboratory Pouch Cell Making Case Forming Machine for Aluminum Laminated Film

This compact pouch case forming machine is suitable forpouch cell case forming of aluminumlaminated film of flexible packaging lithium battery, driven by pneumatic.

Tags :

AOT-AFA-EI300 Scraper Three Roll Transfer Battery Coating Machine

AOT-AFA-EI300 scraper three roll transfer coating machine, roll to roll method, continuous and intermittent coating, width 300mm, coating width 50-260mm, coating surface density accuracy ± 1.5%, 150 ℃ hot air oven, suitable for 8-30 μ m thick metal substrates, including slurry stirring, winding correction function, optional NMP treatment and plasma1

Tags :

Ultrasonic Battery Tab Welding Machine Spot Welding Machine

AOT-MSK-UW-D2000W Ultrasonic Metal (Battery Tab) Welding Machine, compatible with pre welding and final welding of battery cells. The battery cells and tab are manually placed into the fixture, and the fixture is manually slid to the welding station to achieve welding. The equipment includes units such as material sensing, pole tab weldin1

Tags :

Pure Nickel Metal Fiber Felt for Fuel Cells Battery

Nickel fiber felt is a type of fiber felt made of pure nickel metal, which has continuous three-dimensional mesh holes. It can achieve extremely high porosity and pore size.

Tags :

Heavy Duty Disc Cutter with 4 Sets Die For Coin Cell Battery

AOT-MSK-T-06 is a precision disc cutter with max. the pressure of 600kN. This tool is manually operated and is designed for cutting round discs from a thin metal sheet/foil in the range from 0.01 mm

Tags :

18650 Battery Handheld Welder Precision Portable Spot Welding Machine

This machine adopts international precision grade chip to control the welding time. There are many advantages including precise time control, good reliability, wide application, low power consumption

Tags :

Lithium Ion Battery PE Poly 14um Polypropylene Film Separator

The functional film mainly made of polyethylene (PE) plays a key role in physically isolating the positive and negative electrodes to prevent short circuits.

Tags :

Cylinder Battery Cell Single Point Pneumatic Spot Welder

AOT-MSK330A is mainly used for welding the cylinder core's negative terminal (Nickel tab) to the bottom of the cylinder case. It can also be applied to welding processes for nickel hydrogen, nickel chromium, and various lithium-ion batteries.

Tags :

Cylinder Battery High-Frequency Inverter Spot Welding Machine

This machine is controlled by a microcomputer single-chip microcomputer. The welding operation is programmed, with beautiful weld points, small sparks.

Tags :