Split 18650 Cell Tester Suppliers,Split 18650 Cell Tester Manufacturers

Al-Clad CR2032 Coin Cell Case (20d x 3.2mm) for Li-ion Battery

This is a special CR2032 coin cell case with Aluminum coated on the inside and outside of the positive can (60pcs/pack). It can tolerate polarization of higher voltages (up to 5.5V) due to the passivation of cladding by electrolyte component (especially LiPF6 based electrolyte system) to form a layer of AlF3. This AlF3 layer is 1

Tags :

In-situ Analytical Split Test Cell for Lithium/Zinc Air Battery

It contains a quartz observation window on the bottom which allows in-situ X-Ray analysis of battery material phase transition during charging and discharging process. Two needle valves allow you control air flow pressure and its splittable design provides you the most convenient way to test various anode and cathode materials. It's1

Tags :

precision semi-automatic die cutter for pouch cell electrode sheets

AOT-MSK-180-N is a precision semi-automatic die cutter for pouch cell electrode sheets (Max. 200mm L x 200mm W). It is an updated version of MSK-180 with more stability and better accuracy at reducing the burrs and powder-shedding of the electrode sheets.

Tags :

AOT Lithium Battery Capacity Tester Testing Machine

This battery test system provides most applications in battery testing fields such as electrode materials research, battery performance test, small-scale battery formation, capability grading, battery pack testing and etc.

Tags :

Laboratory Pouch Cell Making Case Forming Machine for Aluminum Laminated Film

This compact pouch case forming machine is suitable forpouch cell case forming of aluminumlaminated film of flexible packaging lithium battery, driven by pneumatic.

Tags :

Pure Nickel Metal Fiber Felt for Fuel Cells Battery

Nickel fiber felt is a type of fiber felt made of pure nickel metal, which has continuous three-dimensional mesh holes. It can achieve extremely high porosity and pore size.

Tags :

Solid-state Batteries Test Fixture

The M-ISS-B16 solid-state button type battery device is a specialized testing device for solid-state batteries. The fixture consists of an upper pressure rod, a lower pressure rod, a cavity, and a seal. The fixture can be used with our MSK-YLJ-MA5T electric press for solid-state powder pressing, or with our S-MS-P500 solid-state battery pressure te1

Tags :

High-performance Lithium-ion Battery Tester System

Mainly used for battery material research, high-precision test, pulse charge-discharge test, direct current internal resistance (DCIR) test, cycle life (Cycle Life) test.

Tags :

Lithium-ion Battery Tester
Battery Analyzer

Heavy Duty Disc Cutter with 4 Sets Die For Coin Cell Battery

AOT-MSK-T-06 is a precision disc cutter with max. the pressure of 600kN. This tool is manually operated and is designed for cutting round discs from a thin metal sheet/foil in the range from 0.01 mm

Tags :

18650 Battery Handheld Welder Precision Portable Spot Welding Machine

This machine adopts international precision grade chip to control the welding time. There are many advantages including precise time control, good reliability, wide application, low power consumption

Tags :

Cylinder Battery High-Frequency Inverter Spot Welding Machine

This machine is controlled by a microcomputer single-chip microcomputer. The welding operation is programmed, with beautiful weld points, small sparks.

Tags :

Compact Disassembling Cutter Machine for 18650 Cylindrical Cases

MSK-530B cylindrical battery disassembling machine is a specialized machine designed for laboratory analysis of the internal state of cylindrical batteries. Different specifications of molds can be selected to disassemble cylindrical batteries of different models. Max: Diameter 50mm x Length 100mm; Min: Diameter 5mm x Length 40mm; This device uses 1

Tags :