Sheet Substrate Slot Die Coater Suppliers,Sheet Substrate Slot Die Coater Manufacturers

Manual Die Cutters for Pouch Cell Battery

Manual Die Cutters for Pouch Cell Cathode and Anode Electrodes

AOT-MSK-T11 is a manual die-cutting knife set for cutting cathode and anode electrode of pouch batteries. Can be put into the glove box for operation. One for cutting 57 mm x 44 mm cathode electrode sheets and the other for cutting 58 mm x 45 mm anode electrode sheets.

Tags :

Pole Piece Electrode Die Cutting Machine For Pouch Cell Battery

AOT-DC-80 die cutting machine is suitable for die cutting of positive and negative plates of pouch cell batteries. It is pneumatically die cutting and can be used in a glove box.

Tags :

Hard Carbon Coated Al Foil for Na-ion Battery Cathode Material

This electrode sheet is based on aluminum foil coated with hard carbon , used as a cathode electrode of a Na-Ion battery.

Tags :

Solid-State Electrolyte Sheet LLZTO Pellet For Lithium Battery

Tantalum doped lithium lanthanum zirconium garnet, composed of>99 9% of precursor material synthesis. Phase: Cubic phase, garnet structure.

Tags :

LATP Ion Conductive Ceramic Sheet for Solid State Battery

The unique performance of solid electrolyte LATP ceramic sheet Li1.3Al0.3Ti1.7 (PO4) 3 lithium aluminum titanium phosphate (LATP) film solid electrolyte material makes it an ideal choice for all solid-state lithium batteries, advanced lithium sulfur batteries, lithium-air batteries, lithium-water batteries, etc. The LISICON (lithium ion superion co1

Tags :

Sodium Metal Foil for Sodium Ion Battery Research

Material Name： Sodium Foil, Sodium Sheet, Na Sheet, Na Foil, Sodium metal Foil

Tags :

Lithium Battery Electrode Substrate Material Nickel Foam

Nickel Foam For Lithium Battery Electrode Substrate Material

Foam nickel is a kind of porous metal with three-dimensional full through mesh structure, which is made of foam like metal nickel through high-tech deep processing.

Tags :

Lithium Battery Three-Roll Transfer Coating Machine For Battery Line

The coating machine is a three roll transfer coating equipment that is convenient for surface coating processes on various substrates. Especially applied in the lithium-ion battery industry, while meeting the requirements of coating accuracy and consistency, it is designed with excellent drying effect.

Tags :

NMC622 Single Side Coated Aluminum Foil for Battery Cathode Electrode Sheet

Reference for the use of Electrode Sheet: ①Electrode sheet cutting: AOT-DC-80 Cutting machine Recommended size of button electrode sheet: 12mm/14mm diameter. ②Pole piece weighing: AOT series balance active substance formula: active substance mass = (pole piece mass (mg) - disc area (cm2) * collector surface density (mg/cm2) * active substance propo1

Tags :

Heat Roller Press Machine For Battery Electrode Sheet Calendering With Winding System

1.This Roll Press Machine is a continuous roll to roll heat calendering machine . It has dual rollers of 150mm dia. x 300mm width and dual micrometer. The roll press machine is an ideal hot rolling press for adjusting thickness and increasing active material density of the electrode in Li-Ion batteries research after coating and drying. 21

Tags :

Lab Battery Slurry Vacuum Film Coating Machine with Dryer

Vacuum film coating machine is widely used in various high temperature coating process, such as ceramic film, crystal film, battery electrode, special nano film

Tags :

Lab Flatbed Coating Machine

MSK-AFA-PD200 flatbed coating machine, equipped with extrusion coating mold, linear plunger feeding, minimum material loss of about 18ml, maximum coating size of 200x300mm, can be used in a glove box, suitable for low viscosity less than 1000mPa. s, coating thickness accuracy of ± 1 μ m, can be optionally coated with scraper, wire rod, and four sid1

Tags :