Nmc Oh 2 811 Material For Battery

Graphite Coated Copper Foil Electrode Disk for Coin Cells

AOT- GCEDis a Diameter 19 pre-cut graphite coated copper foil for CR20XX coin cell battery and split testing cells.

Tags :

Hot Melt Adhesive Polymer Tape for Heat Sealing Pouch Cell Tabs

Hot Melt Adhesives Polymer Tapes)for Heat Sealing Pouch Cells. This hot melt adhesive/sealant is specially designed to seal labels between aluminum laminated film pouch battery compartments.

Tags :

Battery Forced Internal-Short Circuit Tester

Battery Forced Internal Short Circuit (ISC) Tester

AOT-MSK-ISC is a highly integrated three-in-one battery ISC test system, which can simulate actual tests, and can measure battery voltage, temperature, humidity, and crushing pressure under various environmental conditions.

Tags :

Cylindrical Battery Cell Pack Spot Welding Machine

Automatic Double Sides Spot Welding Machine For Cylindrical Battery

Applicable to electric vehicle battery pack, street lamp battery pack, automobile battery module, balance vehicle battery pack, scooter battery pack, mobile power supply, starting battery pack module, power tool battery pack, notebook battery pack, various electronic products and other battery combinations!

Tags :

Portable Cylindrical Battery Spot Welder Machine

This battery spot welder is specially designed for 18650, 26650, 32650 and 21700 battery packs. 0.05-0.35 mm nickelplated steel and 0.05-0.2 mm pure nickel strip could be welded.

Tags :

100V 10A Charge 20A Discharge Battery Pack Testing Aging Machine

This aging cabinet is mainly used to test the charge and discharge cycles of lithium batteries. The test items mainly include: battery charging protection voltage, discharge protection voltage, capacity, etc. The equipment has four test steps: charging, discharging, shelving, and cycling. Test the battery according to the set process by editing the1

Tags :

10 Channels Cylindrical Battery Sorting Machine For Battery Pack

This equipment is equipped with high precision internal resistance, voltage and automatic test system. According to the set internal resistance voltage value, the battery can be accurately sent to the specified gear.

Tags :

Sorting Machine and Battery Insulation Paper Sticking Machine

Cylindrical Battery Sticker Sorting Machine

It is a testing and sorting equipment for sticking insulating highland barley paper to the positive electrode of cylindrical battery, and testing and sorting parameters such as battery internal resistance and voltage. It has its own high-precision internal resistance and voltage automatic testing system. The set internal resistance and voltage valu1

Tags :

Battery Charging and Discharging Tester Machine

512 Channel Battery Charging and Discharging TestIing Machine For Battery Analyzer Tester

5V6A Each device can carry out constant current and constant voltage charging and constant current discharge test on 512 batteries meeting the voltage range.

Tags :

Acrylic Glove Box With Pressure Gauge For Battery Research

This equipment is mainly composed of three parts, namely the main box, the transfer room and the side door. There are 2 glove ports. In front of the main vacuum glove box, the inside of the box can be clearly seen. Can also be customized according to customer requirements.

Tags :

High Temperature Muffle Furnaces For Laboratory Research

The furnace consists of high quality alumina fiber brick and MoSi2 heating elements with special design, and furnace temperature is controlled byhigh precision SCR (Silicon Controlled Rectifier) digital controller with accuracy ±1℃ and 30 segments programmable.

Tags :

Grade Sodium Metal Chips For Coin Cell Raw Material

It is specially designed for button batteries (2032, 2025, 2016) to use composite sodium sheets, with a diameter of 15.6mm, a thickness of 0.4~0.5 mm, and a purity of more than 99.7%.

Tags :