LLZTO Conductive Ceramic Sheet Suppliers,LLZTO Conductive Ceramic Sheet Manufacturers

Conductive Carbon Coated Copper Foil For Lithium ion Battery lab Research

Conductive carbon-coated copper foil can replace conventional Al foil as a better anode substrate with improved properties.

Tags :

Carbon Coated Aluminum Foil for Lithium Battery

Carbon-coated aluminum foil is a new type of battery cathode substrate. carbon-coated aluminum foil has good conductivity, low internal resistance and strong mechanical properties.

Tags :

Hard Carbon Coated Al Foil for Na-ion Battery Cathode Material

This electrode sheet is based on aluminum foil coated with hard carbon , used as a cathode electrode of a Na-Ion battery.

Tags :

Battery Cathode Material Black Conductive Activated Carbon Paper For Lithium Battery

Toray Paper- TGP-T-060 - is a carbon fiber composite paper suitable for use as a catalyst backing layer for fuel cells,electrolyzers, batteries, and various other electrochemical devices after applying a microporous layer (MPL) onto it.

Tags :

Solid-State Electrolyte Sheet LLZTO Pellet For Lithium Battery

Tantalum doped lithium lanthanum zirconium garnet, composed of>99 9% of precursor material synthesis. Phase: Cubic phase, garnet structure.

Tags :

LATP Ion Conductive Ceramic Sheet for Solid State Battery

The unique performance of solid electrolyte LATP ceramic sheet Li1.3Al0.3Ti1.7 (PO4) 3 lithium aluminum titanium phosphate (LATP) film solid electrolyte material makes it an ideal choice for all solid-state lithium batteries, advanced lithium sulfur batteries, lithium-air batteries, lithium-water batteries, etc. The LISICON (lithium ion superion co1

Tags :

Sodium Metal Foil for Sodium Ion Battery Research

Material Name： Sodium Foil, Sodium Sheet, Na Sheet, Na Foil, Sodium metal Foil

Tags :

Lithium ion electrolyte powder LLZTO Powder

The oxide of LLZTO, with nominal composition Li6.5La3Zr1.4Ta0.5O12, is a new solid electrolyte for Li-based batteries with high Ion conductivity.

Tags :

NMC622 Single Side Coated Aluminum Foil for Battery Cathode Electrode Sheet

Reference for the use of Electrode Sheet: ①Electrode sheet cutting: AOT-DC-80 Cutting machine Recommended size of button electrode sheet: 12mm/14mm diameter. ②Pole piece weighing: AOT series balance active substance formula: active substance mass = (pole piece mass (mg) - disc area (cm2) * collector surface density (mg/cm2) * active substance propo1

Tags :

Heat Roller Press Machine For Battery Electrode Sheet Calendering With Winding System

1.This Roll Press Machine is a continuous roll to roll heat calendering machine . It has dual rollers of 150mm dia. x 300mm width and dual micrometer. The roll press machine is an ideal hot rolling press for adjusting thickness and increasing active material density of the electrode in Li-Ion batteries research after coating and drying. 21

Tags :

Lab Flatbed Coating Machine

MSK-AFA-PD200 flatbed coating machine, equipped with extrusion coating mold, linear plunger feeding, minimum material loss of about 18ml, maximum coating size of 200x300mm, can be used in a glove box, suitable for low viscosity less than 1000mPa. s, coating thickness accuracy of ± 1 μ m, can be optionally coated with scraper, wire rod, and four sid1

Tags :

Manganese Dioxide Positive Electrode Sheet

Manganese Dioxide Coated Stainless Steel Foil Positive Electrode Sheet of Zinc ion Battery

Water based zinc ion battery positive electrode sheet, coated with active material (manganese based or vanadium based) On the surface of the current collector, pole pieces are made by rolling, die-cutting, etc., with high loading capacity, controllability, good processability, and adjustable pole piece parameter size.

Tags :