Lab Viscometer Suppliers,Lab Viscometer Manufacturers

Battery cathode material Na3V2(PO4)202F

Na3V2(PO4)202F material has good structural stability and can maintain a high capacity retention rate after multiple charge and discharge cycles, which can extend the service life of the battery and reduce the use cost. Sodium vanadium fluorooxyphosphate has a high theoretical specific capacity, the theoretical specific capacity can reach 130mAh/g 1

Tags :

Double Dispersed Axis Vacuum Planetary Mixer For Lithium Battery

MSK-SFM-9-5L dual dispersing shaft vacuum planetary mixer is an efficient mixing device that integrates low-speed mixing and high-speed dispersion. It combines orbital and rotational motion to achieve thorough mixing of materials.

Tags :

Lab Flatbed Coating Machine

MSK-AFA-PD200 flatbed coating machine, equipped with extrusion coating mold, linear plunger feeding, minimum material loss of about 18ml, maximum coating size of 200x300mm, can be used in a glove box, suitable for low viscosity less than 1000mPa. s, coating thickness accuracy of ± 1 μ m, can be optionally coated with scraper, wire rod, and four sid1

Tags :

AOT-AFA-EI300 Scraper Three Roll Transfer Battery Coating Machine

AOT-AFA-EI300 scraper three roll transfer coating machine, roll to roll method, continuous and intermittent coating, width 300mm, coating width 50-260mm, coating surface density accuracy ± 1.5%, 150 ℃ hot air oven, suitable for 8-30 μ m thick metal substrates, including slurry stirring, winding correction function, optional NMP treatment and plasma1

Tags :

Narrow Slit Extrusion Laboratory Coating Machine

AOT-AFA-SD300 narrow slit extrusion coating machine, roll to roll method, continuous and intermittent coating, width 300mm, coating width 50-260mm, optional extrusion coating die head, coating surface density accuracy ± 1.5%, 150 ℃ hot air oven, suitable for 8-30 μ m thick metal substrates, optional NMP treatment and feeding device.

Tags :

Lab Coater Coating Machine for 18650 Cylindrical Battery Lithium Ion Dryer Equipment

AOT-TBJ-180C is a small roll-to-roll coater for laboratory research, because it can coat continuously, it is suitable for pilot scale battery research work in colleges, universities and factories.

Tags :

Lithium ion Battery Slurry Filtration Machine for Laboratory

AOT-SF-500M battery slurry filtration device is an essential key equipment in the battery production process, mainly used to remove impurities and particles from the slurry, ensuring the consistency and performance of the battery

Tags :

Electric Hydraulic Pressing Machine For Battery Material/Ceramic/Chemistry Laboratories

AOT- MSK-YLJ-E30T electric tablet press is a device that can press powder materials into sheets, and can be widely used in industries such as silicates, ceramics, powder metallurgy, and lithium batteries. This device uses a motor as the hydraulic drive system and adopts a digital pressure sensor to accurately control the pressing force, making it a1

Tags :

Anti-Static Anti-Magnetic High Temperature Acid-Alkali Stainless Steel Tweezers

Ceramic tweezers high temperature resistance, acid and alkali resistance, anti-static, rusting high precision, can pick up small hair, tail steel rebound design, good elasticity, high temperature resistance 1300 degrees can work for a long time, wide range of applications head clamping, can be used for clamping precision electronic components, bird1

Tags :

Anti-Static Plastic Tweezers For Lab Research

Anti-static, acid resistance, strong toughness, thickened PE insulating plastic material anti-static, insulating plastic material tip hard wear, good tension, comfortable to hold, non-slip

Tags :