Lab Potassium Metal Chips Suppliers,lab Potassium Metal Chips Manufacturers

Heat Roller Press Machine For Battery Electrode Sheet Calendering With Winding System

1.This Roll Press Machine is a continuous roll to roll heat calendering machine . It has dual rollers of 150mm dia. x 300mm width and dual micrometer. The roll press machine is an ideal hot rolling press for adjusting thickness and increasing active material density of the electrode in Li-Ion batteries research after coating and drying. 21

Tags :

Battery Anode Material Potassium Metal Chips For Lab Reseaarch

99.7% High Purity Electrode Potassium Metal Chips For CR2032 2025 2016 Coin Cell Case.

Tags :

Battery Material high purity Potassium Metal Chips

99.7% High Purity Electrode Potassium Metal Chips For CR2032 2025 2016 Coin Cell Case.

Tags :

potassium metal chips for coin cell

99.7% High Purity Electrode Potassium Metal Chips For CR2032 2025 2016 Coin Cell Case.

Tags :

Battery cathode material Na3V2(PO4)202F

Na3V2(PO4)202F material has good structural stability and can maintain a high capacity retention rate after multiple charge and discharge cycles, which can extend the service life of the battery and reduce the use cost. Sodium vanadium fluorooxyphosphate has a high theoretical specific capacity, the theoretical specific capacity can reach 130mAh/g 1

Tags :

Double Dispersed Axis Vacuum Planetary Mixer For Lithium Battery

MSK-SFM-9-5L dual dispersing shaft vacuum planetary mixer is an efficient mixing device that integrates low-speed mixing and high-speed dispersion. It combines orbital and rotational motion to achieve thorough mixing of materials.

Tags :

Lab Flatbed Coating Machine

MSK-AFA-PD200 flatbed coating machine, equipped with extrusion coating mold, linear plunger feeding, minimum material loss of about 18ml, maximum coating size of 200x300mm, can be used in a glove box, suitable for low viscosity less than 1000mPa. s, coating thickness accuracy of ± 1 μ m, can be optionally coated with scraper, wire rod, and four sid1

Tags :

AOT-AFA-EI300 Scraper Three Roll Transfer Battery Coating Machine

AOT-AFA-EI300 scraper three roll transfer coating machine, roll to roll method, continuous and intermittent coating, width 300mm, coating width 50-260mm, coating surface density accuracy ± 1.5%, 150 ℃ hot air oven, suitable for 8-30 μ m thick metal substrates, including slurry stirring, winding correction function, optional NMP treatment and plasma1

Tags :

Narrow Slit Extrusion Laboratory Coating Machine

AOT-AFA-SD300 narrow slit extrusion coating machine, roll to roll method, continuous and intermittent coating, width 300mm, coating width 50-260mm, optional extrusion coating die head, coating surface density accuracy ± 1.5%, 150 ℃ hot air oven, suitable for 8-30 μ m thick metal substrates, optional NMP treatment and feeding device.

Tags :

Ultrasonic Battery Tab Welding Machine Spot Welding Machine

AOT-MSK-UW-D2000W Ultrasonic Metal (Battery Tab) Welding Machine, compatible with pre welding and final welding of battery cells. The battery cells and tab are manually placed into the fixture, and the fixture is manually slid to the welding station to achieve welding. The equipment includes units such as material sensing, pole tab weldin1

Tags :

Pure Nickel Metal Fiber Felt for Fuel Cells Battery

Nickel fiber felt is a type of fiber felt made of pure nickel metal, which has continuous three-dimensional mesh holes. It can achieve extremely high porosity and pore size.

Tags :

Lab Coater Coating Machine for 18650 Cylindrical Battery Lithium Ion Dryer Equipment

AOT-TBJ-180C is a small roll-to-roll coater for laboratory research, because it can coat continuously, it is suitable for pilot scale battery research work in colleges, universities and factories.

Tags :