High Quality Vacuum Glove Box Suppliers,High Quality Vacuum Glove Box Manufacturers

1200-degree atmosphere box-type furnace

This atmosphere box furnace with resistance wire heating element, using double layer shell structure and program temperature control instrument. The furnace is made of alumina polycrystal fiber material, and the double furnace shell is equipped with air cooling system, which can raise and lower the temperature quickly. Can pass argon, nitrogen, oxy1

Tags :

High Pure Lithium Battery Material LiBF4 Poweder

Usage: Used to improve cycle life, improve lithium-ion battery performance; As a film forming additive, LiBF4 has been widely used in current electrolytes, adding LiBF4 can broaden the operating temperature range of lithium-ion batteries and improve the high and low temperature discharge performance of batteries.

Tags :

Lithium Battery Material LiBOB Poweder For Lab Research

In lithium-ion batteries, the main role of LiBOB is to transport particles and conduct current. To perform these tasks effectively, it requires high solubility and conductivity, good chemical stability, and a wide electrochemical window. The anionic structure of LiBOB molecule has delocalization, which makes it exhibit excellent performance in the 1

Tags :

High Pure Lithium Battery Material LiFSI Poweder For Lab Research

LiFSI has good solubility in common organic solvents and can be fully mixed with solvents and other components in the electrolyte to improve the uniformity and stability of the battery's electrolyte. LiFSI electrolyte has good compatibility with the two main components of SEI film, and only replaces some of its components at 160°C. LiFSI can make u1

Tags :

Battery Material LiFSI
High Purity LiFSI Poweder

Lithium Battery Cathode Material lithium difluorophosphate Poweder For Lab Research

Lithium difluorophosphate is an inorganic compound with the chemical formula LiPO₂F₂. This substance mainly appears as a white powdery solid, with a melting point higher than 300°C, a density of 1.979g/cm³, and a solubility of 40324mg/L at 20°C. Its vapour pressure is 0.000000145Pa at 25°C and 298K. Lithium difluorophosphate has a wide range of app1

Tags :

High pure Battery Material LiTFSI Poweder For Lab Research

Lithium bistrifluoromethylsulfonimide is a white crystal or powder that has good thermal stability and begins to decompose when heated to 360 ° C. It has high electrochemical stability and conductivity, and has corrosion effect on aluminum collector at high voltage (above 4.2V). Therefore, it is often used as a lithium ion battery, organic electrol1

Tags :

Lab Tube Furnace Single Phase Electric 1200C Vacuum Tubular Furnace with Small Quartz Tube

This tubular furnace takes resistance wire as heating element, adopts double shell structure and temperature control meter, can carry out 30 stage programmed temperature control, phase shift trigger, thyristor control, furnace adopts alumina polycrystalline fiber material, both ends of the furnace tube can be sealed by stainless steel flange, stain1

Tags :

Tube Furnace Single Phase Electric Vacuum Tube Furnace with Small Quartz Tube

Tubular furnace is a commonly used heating equipment, mainly composed of furnace body, heating element, temperature control system and other parts.

Tags :

Battery Anode Material Potassium Metal Chips For Lab Reseaarch

99.7% High Purity Electrode Potassium Metal Chips For CR2032 2025 2016 Coin Cell Case.

Tags :

Battery Material high purity Potassium Metal Chips

99.7% High Purity Electrode Potassium Metal Chips For CR2032 2025 2016 Coin Cell Case.

Tags :

Lab Battery Slurry Vacuum Film Coating Machine with Dryer

Vacuum film coating machine is widely used in various high temperature coating process, such as ceramic film, crystal film, battery electrode, special nano film

Tags :

Desk-Top Dual-Shaft Planetary Vacuum Mixer w/ Optional Containers

AOT-SFM-16 is a compact dual-shaft planetary vacuum mixer. Compared to single-shaft models, the dual-shaft mixer comes with three segments of programmable mixing speed from 0 - 600 rpm, which provides more uniform slurry mixing. It has a built-in pump for removing the gas bubble, which can vacuum the mixing container to -0.08 MPa. One 150ml S1

Tags :