Film Coater With Doctor Blade Suppliers,Film Coater With Doctor Blade Manufacturers

Battery Electrode Split Test Cell with Be Window

AOT-EQ-STC-BEW battery can accommodate electrodes and separators of various sizes (diameter 19, 20, and 24mm). It is designed for simple and rapid assembly testing of rechargeable battery electrode materials.

Tags :

Lithium Battery Three-Roll Transfer Coating Machine For Battery Line

The coating machine is a three roll transfer coating equipment that is convenient for surface coating processes on various substrates. Especially applied in the lithium-ion battery industry, while meeting the requirements of coating accuracy and consistency, it is designed with excellent drying effect.

Tags :

Lab Tube Furnace Single Phase Electric 1200C Vacuum Tubular Furnace with Small Quartz Tube

This tubular furnace takes resistance wire as heating element, adopts double shell structure and temperature control meter, can carry out 30 stage programmed temperature control, phase shift trigger, thyristor control, furnace adopts alumina polycrystalline fiber material, both ends of the furnace tube can be sealed by stainless steel flange, stain1

Tags :

Small Size High Purity Single layer Graphene Oxide Powder For Battery Research

material characteristics： Graphene oxide is an oxide of graphene whose unique structure gives it outstanding physical and chemical properties. Small-size high-purity graphene oxide has a higher specific surface area and more abundant active sites, which enable it to play an important role in batteries. the application in batteries： High energy dens1

Tags :

Ultra-pure monolayer Single layer Graphene Oxide Powder For Battery Research

The application of ultra-pure single-layer graphene oxide in batteries is mainly reflected in the following aspects: Efficient charge and discharge: Because graphene oxide has a high specific surface area and rich functional groups on the surface, it can provide a larger electrode surface area when used as an electrode material, so that lith1

Tags :

Lab Battery Slurry Vacuum Film Coating Machine with Dryer

Vacuum film coating machine is widely used in various high temperature coating process, such as ceramic film, crystal film, battery electrode, special nano film

Tags :

Lithium Battery Aluminium Foil Coating Machine with Vacuum Pump and Dryer

description： The battery coating machine is a device specially used for uniformly coating the surface of the positive and negative electrode materials of the battery. It enables precise control of coating thickness and speed to ensure the stability of coating quality and performance. In the lithium battery production process, the battery coating ma1

Tags :

In-situ Analytical Split Test Cell for Lithium/Zinc Air Battery

It contains a quartz observation window on the bottom which allows in-situ X-Ray analysis of battery material phase transition during charging and discharging process. Two needle valves allow you control air flow pressure and its splittable design provides you the most convenient way to test various anode and cathode materials. It's1

Tags :

Lithium/Zinc Air Battery Split Test Cell

Lab Flatbed Coating Machine

MSK-AFA-PD200 flatbed coating machine, equipped with extrusion coating mold, linear plunger feeding, minimum material loss of about 18ml, maximum coating size of 200x300mm, can be used in a glove box, suitable for low viscosity less than 1000mPa. s, coating thickness accuracy of ± 1 μ m, can be optionally coated with scraper, wire rod, and four sid1

Tags :

Extrusion Transfer Coating Machine For Battery Machine

AOT-AFA-DE200 multifunctional coating machine, roll to roll method, continuous and intermittent coating, width 200mm, coating width 50-160mm, modular head structure, optional extrusion coating, transfer coating, scraper coating, micro gravure coating, extrusion transfer coating, extrusion scraper coating. When multifunctional coating, the coating f1

Tags :

Lab Coater Coating Machine for 18650 Cylindrical Battery Lithium Ion Dryer Equipment

AOT-TBJ-180C is a small roll-to-roll coater for laboratory research, because it can coat continuously, it is suitable for pilot scale battery research work in colleges, universities and factories.

Tags :

Heavy Duty Disc Cutter with 4 Sets Die For Coin Cell Battery

AOT-MSK-T-06 is a precision disc cutter with max. the pressure of 600kN. This tool is manually operated and is designed for cutting round discs from a thin metal sheet/foil in the range from 0.01 mm

Tags :