Device For Measuring Electrical Resistance Suppliers,Device For Measuring Electrical Resistance Manufacturers

Lithium battery coaxial double cylinder structure SSR viscometer (special for small samples) is suitable for 7ml-13ml

A new LV-SSR Brinell rotary viscometer adopts high performance stepping motor and driver, which runs accurately and smoothly according to the program setting, and the motor runs through the torque sensor to drive the rotor to rotate at constant speed. When the rotor is subjected to viscous resistance in the measured liquid, the force is fed back to1

Tags :

Battery cathode material Na3V2(PO4)202F

Na3V2(PO4)202F material has good structural stability and can maintain a high capacity retention rate after multiple charge and discharge cycles, which can extend the service life of the battery and reduce the use cost. Sodium vanadium fluorooxyphosphate has a high theoretical specific capacity, the theoretical specific capacity can reach 130mAh/g 1

Tags :

Lab Flatbed Coating Machine

MSK-AFA-PD200 flatbed coating machine, equipped with extrusion coating mold, linear plunger feeding, minimum material loss of about 18ml, maximum coating size of 200x300mm, can be used in a glove box, suitable for low viscosity less than 1000mPa. s, coating thickness accuracy of ± 1 μ m, can be optionally coated with scraper, wire rod, and four sid1

Tags :

Laboratory Pouch Cell Making Case Forming Machine for Aluminum Laminated Film

This compact pouch case forming machine is suitable forpouch cell case forming of aluminumlaminated film of flexible packaging lithium battery, driven by pneumatic.

Tags :

AOT-AFA-EI300 Scraper Three Roll Transfer Battery Coating Machine

AOT-AFA-EI300 scraper three roll transfer coating machine, roll to roll method, continuous and intermittent coating, width 300mm, coating width 50-260mm, coating surface density accuracy ± 1.5%, 150 ℃ hot air oven, suitable for 8-30 μ m thick metal substrates, including slurry stirring, winding correction function, optional NMP treatment and plasma1

Tags :

Lithium ion Battery Slurry Filtration Machine for Laboratory

AOT-SF-500M battery slurry filtration device is an essential key equipment in the battery production process, mainly used to remove impurities and particles from the slurry, ensuring the consistency and performance of the battery

Tags :

Lithium Ion Battery PE Poly 14um Polypropylene Film Separator

The functional film mainly made of polyethylene (PE) plays a key role in physically isolating the positive and negative electrodes to prevent short circuits.

Tags :

100w Fiber Laser Cleaning Machine for Remove Dirt, Rust, Coatings

Fiber laser cleaning machine featuring excellent cleaning effect, high precision, minimal damage to workpieces, and environmental friendliness.

Tags :

15KV-50KV Battery Hi-Pot Tester for Insulation Breakdown and Destructive Testing

The RK2674 series withstand voltage tester is an instrument for measuring the withstand voltage strength.

Tags :

5KV Battery Hi-Pot Tester for Insulation Breakdown and Destructive Testing

The RK2672 series withstand voltage tester is an instrument for measuring the withstand voltage strength.

Tags :

Kuraray Activated Carbon Powder YP-50F for Lab Battery Raw Material

Kuraray YP-50F activated carbon powder has a well-developed pore structure, a large specific surface area, strong adsorption capacity and can efficiently adsorb various substances.

Tags :