Conductive Ceramic Sheet LATP Suppliers,Conductive Ceramic Sheet LATP Manufacturers

Conductive Carbon Coated Copper Foil For Lithium ion Battery lab Research

Conductive carbon-coated copper foil can replace conventional Al foil as a better anode substrate with improved properties.

Tags :

Carbon Coated Aluminum Foil for Lithium Battery

Carbon-coated aluminum foil is a new type of battery cathode substrate. carbon-coated aluminum foil has good conductivity, low internal resistance and strong mechanical properties.

Tags :

Hard Carbon Coated Al Foil for Na-ion Battery Cathode Material

This electrode sheet is based on aluminum foil coated with hard carbon , used as a cathode electrode of a Na-Ion battery.

Tags :

LATP Li1.3Al0.3Ti1.7P3O12 Soild State Battery Electrolyte Power For Lithium Battery

Tags :

Battery Cathode Material Black Conductive Activated Carbon Paper For Lithium Battery

Toray Paper- TGP-T-060 - is a carbon fiber composite paper suitable for use as a catalyst backing layer for fuel cells,electrolyzers, batteries, and various other electrochemical devices after applying a microporous layer (MPL) onto it.

Tags :

Solid-State Electrolyte Sheet LLZTO Pellet For Lithium Battery

Tantalum doped lithium lanthanum zirconium garnet, composed of>99 9% of precursor material synthesis. Phase: Cubic phase, garnet structure.

Tags :

LATP Ion Conductive Ceramic Sheet for Solid State Battery

The unique performance of solid electrolyte LATP ceramic sheet Li1.3Al0.3Ti1.7 (PO4) 3 lithium aluminum titanium phosphate (LATP) film solid electrolyte material makes it an ideal choice for all solid-state lithium batteries, advanced lithium sulfur batteries, lithium-air batteries, lithium-water batteries, etc. The LISICON (lithium ion superion co1

Tags :

Sodium Metal Foil for Sodium Ion Battery Research

Material Name： Sodium Foil, Sodium Sheet, Na Sheet, Na Foil, Sodium metal Foil

Tags :

Lithium ion electrolyte powder LLZTO Powder

The oxide of LLZTO, with nominal composition Li6.5La3Zr1.4Ta0.5O12, is a new solid electrolyte for Li-based batteries with high Ion conductivity.

Tags :

NMC622 Single Side Coated Aluminum Foil for Battery Cathode Electrode Sheet

Reference for the use of Electrode Sheet: ①Electrode sheet cutting: AOT-DC-80 Cutting machine Recommended size of button electrode sheet: 12mm/14mm diameter. ②Pole piece weighing: AOT series balance active substance formula: active substance mass = (pole piece mass (mg) - disc area (cm2) * collector surface density (mg/cm2) * active substance propo1

Tags :

Heat Roller Press Machine For Battery Electrode Sheet Calendering With Winding System

1.This Roll Press Machine is a continuous roll to roll heat calendering machine . It has dual rollers of 150mm dia. x 300mm width and dual micrometer. The roll press machine is an ideal hot rolling press for adjusting thickness and increasing active material density of the electrode in Li-Ion batteries research after coating and drying. 21

Tags :

Lab Flatbed Coating Machine

MSK-AFA-PD200 flatbed coating machine, equipped with extrusion coating mold, linear plunger feeding, minimum material loss of about 18ml, maximum coating size of 200x300mm, can be used in a glove box, suitable for low viscosity less than 1000mPa. s, coating thickness accuracy of ± 1 μ m, can be optionally coated with scraper, wire rod, and four sid1

Tags :