Celgard 2400 For Lithium Batteries Suppliers,Celgard 2400 For Lithium Batteries Manufacturers

Pipetting Devices For Battery Laboratory Research

The pipettes cover volume range of 0.1μl to 10ml

Tags :

Battery Electrolyte Filling Machine Injector For Lab Research

The AOT-BD-50ML is a new generation bottle top burette and dispenser. More accurate and convenient titration.

Tags :

Graphite Coated Copper Foil Electrode Disk for Coin Cells

AOT- GCEDis a Diameter 19 pre-cut graphite coated copper foil for CR20XX coin cell battery and split testing cells.

Tags :

Hot Melt Adhesive Polymer Tape for Heat Sealing Pouch Cell Tabs

Hot Melt Adhesives Polymer Tapes)for Heat Sealing Pouch Cells. This hot melt adhesive/sealant is specially designed to seal labels between aluminum laminated film pouch battery compartments.

Tags :

100V 10A Charge 20A Discharge Battery Pack Testing Aging Machine

This aging cabinet is mainly used to test the charge and discharge cycles of lithium batteries. The test items mainly include: battery charging protection voltage, discharge protection voltage, capacity, etc. The equipment has four test steps: charging, discharging, shelving, and cycling. Test the battery according to the set process by editing the1

Tags :

10 Channels Cylindrical Battery Sorting Machine For Battery Pack

This equipment is equipped with high precision internal resistance, voltage and automatic test system. According to the set internal resistance voltage value, the battery can be accurately sent to the specified gear.

Tags :

Battery Charging and Discharging Tester Machine

512 Channel Battery Charging and Discharging TestIing Machine For Battery Analyzer Tester

5V6A Each device can carry out constant current and constant voltage charging and constant current discharge test on 512 batteries meeting the voltage range.

Tags :

Acrylic Glove Box With Pressure Gauge For Battery Research

This equipment is mainly composed of three parts, namely the main box, the transfer room and the side door. There are 2 glove ports. In front of the main vacuum glove box, the inside of the box can be clearly seen. Can also be customized according to customer requirements.

Tags :

High Temperature Muffle Furnaces For Laboratory Research

The furnace consists of high quality alumina fiber brick and MoSi2 heating elements with special design, and furnace temperature is controlled byhigh precision SCR (Silicon Controlled Rectifier) digital controller with accuracy ±1℃ and 30 segments programmable.

Tags :

Grade Sodium Metal Chips For Coin Cell Raw Material

It is specially designed for button batteries (2032, 2025, 2016) to use composite sodium sheets, with a diameter of 15.6mm, a thickness of 0.4~0.5 mm, and a purity of more than 99.7%.

Tags :

Uniform Heating Adjustable Tilting Rotary Tube Furnace For Laboratory Research

AOT-T1200 series furnaces are split-able tube furnaces with Fe-Cr-Al alloy heating elements. The precision temperature controller can provide 51 segments heating and cooling steps with +/- 1 ºC accuracy.The furnace is installed with 60mm to 100mm O. D quartz tube with a pair of smart stainless steel vacuum sealing flange and valve/gauge which 1

Tags :

Planetary Vacuum Mixer For Lithium Battery Laboratory Research

AOT-MSK-SFM-2L is a Tri-Shaft Planetary Vacuum Mixer with a 2-liter container and PLC Touch Panel Control. Such a vacuum mixer incorporates the unique tri-shaft stirring design to ensure a gas-bubble free blending of complex materials under vacuum with extreme uniformity.

Tags :