ATE Tester Suppliers,ATE Tester Manufacturers

Lithium sulfur battery carbon sulfur composite positive double-sided electrode plate

Lithium-sulfur battery is the next generation of high energy density electrochemical energy storage device, the carbon and sulfur composite positive electrode double-sided electrode plate is the key component to improve its performance. This electrode sheet uses advanced carbon-sulfur composite technology to effectively compound highly conductive c1

Tags :

Battery Anode Material Potassium Metal Chips For Lab Reseaarch

99.7% High Purity Electrode Potassium Metal Chips For CR2032 2025 2016 Coin Cell Case.

Tags :

Lab Battery Slurry Vacuum Film Coating Machine with Dryer

Vacuum film coating machine is widely used in various high temperature coating process, such as ceramic film, crystal film, battery electrode, special nano film

Tags :

LiCl Anhydrous Lithium Chloride Powder for Solid State Electrolyte

Lithium Chloride (LiCl) Powder is a kind of battery-grade precursor to systhesize Li-based solid-state electrolyte. It has advantages such as high specific capacity and high voltage difference, which effectively enhance the power performance of the battery.

Tags :

Battery cathode material Na3V2(PO4)202F

Na3V2(PO4)202F material has good structural stability and can maintain a high capacity retention rate after multiple charge and discharge cycles, which can extend the service life of the battery and reduce the use cost. Sodium vanadium fluorooxyphosphate has a high theoretical specific capacity, the theoretical specific capacity can reach 130mAh/g 1

Tags :

In-situ Analytical Split Test Cell for Lithium/Zinc Air Battery

It contains a quartz observation window on the bottom which allows in-situ X-Ray analysis of battery material phase transition during charging and discharging process. Two needle valves allow you control air flow pressure and its splittable design provides you the most convenient way to test various anode and cathode materials. It's1

Tags :

Lab Flatbed Coating Machine

MSK-AFA-PD200 flatbed coating machine, equipped with extrusion coating mold, linear plunger feeding, minimum material loss of about 18ml, maximum coating size of 200x300mm, can be used in a glove box, suitable for low viscosity less than 1000mPa. s, coating thickness accuracy of ± 1 μ m, can be optionally coated with scraper, wire rod, and four sid1

Tags :

LLZNO-500NM Lithium Lanthanum Zirconium Niobium Oxide Lithium ion Solid Electrolyte Powder

LLZNO-500NM Lithium Lanthanum Zirconium Niobium Oxide Lithium ion Solid Electrolyte Powder.

Tags :

Manganese Dioxide Positive Electrode Sheet

Manganese Dioxide Coated Stainless Steel Foil Positive Electrode Sheet of Zinc ion Battery

Water based zinc ion battery positive electrode sheet, coated with active material (manganese based or vanadium based) On the surface of the current collector, pole pieces are made by rolling, die-cutting, etc., with high loading capacity, controllability, good processability, and adjustable pole piece parameter size.

Tags :

AOT Lithium Battery Capacity Tester Testing Machine

This battery test system provides most applications in battery testing fields such as electrode materials research, battery performance test, small-scale battery formation, capability grading, battery pack testing and etc.

Tags :

Extrusion Transfer Coating Machine For Battery Machine

AOT-AFA-DE200 multifunctional coating machine, roll to roll method, continuous and intermittent coating, width 200mm, coating width 50-160mm, modular head structure, optional extrusion coating, transfer coating, scraper coating, micro gravure coating, extrusion transfer coating, extrusion scraper coating. When multifunctional coating, the coating f1

Tags :

Lab Double Planetary Vacuum Planetary Mixer Equipment Mixing Machine

AOT-SFM-18 the vacuum mixer has a beautiful appearance, compact size, good mixing uniformity, and is convenient and easy to use. The planetary four blade vacuum mixer is an efficient mixing equipment that integrates vacuum mixing and dispersion. It can be applied to various solvent and powder mixing processes, such as the batching process of lithiu1

Tags :