Anode Electrode Disk Suppliers,Anode Electrode Disk Manufacturers

PET Based New Composite Copper Foil For Battery Anode Substrate

Compared with traditional copper foil, PET substrate has good safety performance, light weight, and good ductility, which can help improve the energy density of batteries.

Tags :

Aluminum Foil Coating Sodium Nickel Iron Manganate

Sodium Nickel Iron Manganate Coated on Aluminum Foil For Sodium Battery

Sodium Nickel Iron Manganate Coated on Aluminum Foil,The contact between the particles and the current collector is better, and the internal resistance of the battery is smaller, which is conducive to the exertion of gram capacity and improves cycle and rate performance.

Tags :

NFSO High Voltage Sodium Iron Sulfate for Sodium-Ion Battery

The chemical formula of sodium iron sulfate is Na2Fe2 (SO4) 3, and its structure is composed of sodium ions Composed of iron ions and sulfate ions. In electrochemical reactions, sodium iron sulfate can release or absorb metal ions such as lithium ions and sodium ions through ion exchange reactions, achieving the charging and discharging process of 1

Tags :

NMC622 Single Side Coated Aluminum Foil for Battery Cathode Electrode Sheet

Reference for the use of Electrode Sheet: ①Electrode sheet cutting: AOT-DC-80 Cutting machine Recommended size of button electrode sheet: 12mm/14mm diameter. ②Pole piece weighing: AOT series balance active substance formula: active substance mass = (pole piece mass (mg) - disc area (cm2) * collector surface density (mg/cm2) * active substance propo1

Tags :

Lithium Battery Anode Material LiDFOB Poweder For Lab Research

Lithium difluorooxalate borate is a white powder or crystal powder, similar to LiBOB. Li+ in LiODFB has a quintuple coordination structure, which easily combines with other molecules to form a regular octahedral coordination structure, and can absorb moisture in air to form LiODFB·H2O. Nowadays, the research of lithium-ion battery is hot, and the c1

Tags :

Small Heatable Vacuum Battery Film Coating Machine with UV Light and Detachable Cover

product description: This battery coating machine is dedicated to the continuous coating process of cathode and anode electrode of lithium ion batteries, suitable for small-scale experiments in colleges and enterprises. It can also be used for ceramic films, crystal films, special nano films, etc. The body is made of stainless steel, which is beaut1

Tags :

Heat Roller Press Machine For Battery Electrode Sheet Calendering With Winding System

1.This Roll Press Machine is a continuous roll to roll heat calendering machine . It has dual rollers of 150mm dia. x 300mm width and dual micrometer. The roll press machine is an ideal hot rolling press for adjusting thickness and increasing active material density of the electrode in Li-Ion batteries research after coating and drying. 21

Tags :

Lithium sulfur battery carbon sulfur composite positive double-sided electrode plate

Lithium-sulfur battery is the next generation of high energy density electrochemical energy storage device, the carbon and sulfur composite positive electrode double-sided electrode plate is the key component to improve its performance. This electrode sheet uses advanced carbon-sulfur composite technology to effectively compound highly conductive c1

Tags :

Battery Automatic Assembly Machine Stacking Machine for Pouch Cell Battery

1、Equipment Overview This equipment is mainly used for experimental square lithium-ion power battery cell Z-shaped stacking, the equipment adopts automatic tension control system, cylinder driven diaphragm reciprocating movement, manual pressure knife to assist stacking, with high stacking efficiency, neatness and good characteristics. 2、Work flow 1

Tags :

AOT-MSK-CSC-B350 the Micro-Battery Electrodes Slitting Machine

This equipment is used for the slitting process of lithium battery electrode coil, mainly suitable for cutting multiple narrow strips. The equipment has high cutting accuracy, adopts closed-loop tension control, and has a stable cutting structure. After cutting, the pole pieces have no defects such as ruffles, burrs, indentations, etc. Designed for1

Tags :

In-situ Analytical Split Test Cell for Lithium/Zinc Air Battery

It contains a quartz observation window on the bottom which allows in-situ X-Ray analysis of battery material phase transition during charging and discharging process. Two needle valves allow you control air flow pressure and its splittable design provides you the most convenient way to test various anode and cathode materials. It's1

Tags :

Manganese Dioxide Positive Electrode Sheet

Manganese Dioxide Coated Stainless Steel Foil Positive Electrode Sheet of Zinc ion Battery

Water based zinc ion battery positive electrode sheet, coated with active material (manganese based or vanadium based) On the surface of the current collector, pole pieces are made by rolling, die-cutting, etc., with high loading capacity, controllability, good processability, and adjustable pole piece parameter size.

Tags :