Anode Electrode Disk For Coin Cells

AOT-MSK-CSC-B350 the Micro-Battery Electrodes Slitting Machine

This equipment is used for the slitting process of lithium battery electrode coil, mainly suitable for cutting multiple narrow strips. The equipment has high cutting accuracy, adopts closed-loop tension control, and has a stable cutting structure. After cutting, the pole pieces have no defects such as ruffles, burrs, indentations, etc. Designed for1

Tags :

Lithium battery coaxial double cylinder structure SSR viscometer (special for small samples) is suitable for 7ml-13ml

A new LV-SSR Brinell rotary viscometer adopts high performance stepping motor and driver, which runs accurately and smoothly according to the program setting, and the motor runs through the torque sensor to drive the rotor to rotate at constant speed. When the rotor is subjected to viscous resistance in the measured liquid, the force is fed back to1

Tags :

Battery cathode material Na3V2(PO4)202F

Na3V2(PO4)202F material has good structural stability and can maintain a high capacity retention rate after multiple charge and discharge cycles, which can extend the service life of the battery and reduce the use cost. Sodium vanadium fluorooxyphosphate has a high theoretical specific capacity, the theoretical specific capacity can reach 130mAh/g 1

Tags :

Al-Clad CR2032 Coin Cell Case (20d x 3.2mm) for Li-ion Battery

This is a special CR2032 coin cell case with Aluminum coated on the inside and outside of the positive can (60pcs/pack). It can tolerate polarization of higher voltages (up to 5.5V) due to the passivation of cladding by electrolyte component (especially LiPF6 based electrolyte system) to form a layer of AlF3. This AlF3 layer is 1

Tags :

In-situ Analytical Split Test Cell for Lithium/Zinc Air Battery

It contains a quartz observation window on the bottom which allows in-situ X-Ray analysis of battery material phase transition during charging and discharging process. Two needle valves allow you control air flow pressure and its splittable design provides you the most convenient way to test various anode and cathode materials. It's1

Tags :

Lab Flatbed Coating Machine

MSK-AFA-PD200 flatbed coating machine, equipped with extrusion coating mold, linear plunger feeding, minimum material loss of about 18ml, maximum coating size of 200x300mm, can be used in a glove box, suitable for low viscosity less than 1000mPa. s, coating thickness accuracy of ± 1 μ m, can be optionally coated with scraper, wire rod, and four sid1

Tags :

Manganese Dioxide Positive Electrode Sheet

Manganese Dioxide Coated Stainless Steel Foil Positive Electrode Sheet of Zinc ion Battery

Water based zinc ion battery positive electrode sheet, coated with active material (manganese based or vanadium based) On the surface of the current collector, pole pieces are made by rolling, die-cutting, etc., with high loading capacity, controllability, good processability, and adjustable pole piece parameter size.

Tags :

precision semi-automatic die cutter for pouch cell electrode sheets

AOT-MSK-180-N is a precision semi-automatic die cutter for pouch cell electrode sheets (Max. 200mm L x 200mm W). It is an updated version of MSK-180 with more stability and better accuracy at reducing the burrs and powder-shedding of the electrode sheets.

Tags :

Laboratory Pouch Cell Making Case Forming Machine for Aluminum Laminated Film

This compact pouch case forming machine is suitable forpouch cell case forming of aluminumlaminated film of flexible packaging lithium battery, driven by pneumatic.

Tags :

AOT-AFA-EI300 Scraper Three Roll Transfer Battery Coating Machine

AOT-AFA-EI300 scraper three roll transfer coating machine, roll to roll method, continuous and intermittent coating, width 300mm, coating width 50-260mm, coating surface density accuracy ± 1.5%, 150 ℃ hot air oven, suitable for 8-30 μ m thick metal substrates, including slurry stirring, winding correction function, optional NMP treatment and plasma1

Tags :

18650 21700 4680 Cylindrical Battery Automatic Winding Machine

Suitable for electrode winding for 4680, 21700, and 18650 cylindrical batteries.

Tags :

Pure Nickel Metal Fiber Felt for Fuel Cells Battery

Nickel fiber felt is a type of fiber felt made of pure nickel metal, which has continuous three-dimensional mesh holes. It can achieve extremely high porosity and pore size.

Tags :