304SS CR2032 Case Suppliers,304SS CR2032 Case Manufacturers

Stainless Steel Coin Cell Spacer for Lab Battery Research

This 304/316 stainless steel coin cell spacer is mainly for lab cr20xx coin cell battery assembly.

Tags :

304 Stainless Steel 18650 Battery Cases with Cap and Gasket

18650 Cylinder Cell Case with Anti-Explosive Cap and Gasket for Lithium ion Battery Making

Tags :

Large Pouch Cell Case Forming Machine for Aluminum-Laminated Films

AOT-MSK-700 is customized and manually pouch cell case forming machine with Max/ 600 x 600 mm pouch die , used for making large pouch cell in battery research .

Tags :

Pneumatic Cylindrical Battery Sealing Machine For Battery Cases Crimper

AOT-QF650 pneumatic sealing machine is mainly used for laboratory battery material research to make cylindrical batteries. Standard equipped with 18650 cylindrical battery sealing mold ， other cylindrical battery sealing molds can also be selected.

Tags :

Pouch Cell Hot Press Shaping Machine For Core After Stacking

AOT-HPS-200H is mainly suitable for hot flat pressing after the battery core is wound. First, place the wound cell on the template, and shape the cell by pressing and heating, so that the thickness of the cell is consistent, the elasticity of the cell is reduced, and the short-circuit rate of the cell is reduced.

Tags :

Automatic Pouch Case Forming Machine for Pouch Cell Production

AOT-MSK-120A is an automatic roll-to-roll case/cup forming machine for pouch cell battery production. Polymer casings made from aluminum laminate films can be prepared automatically and at high speed.

Tags :

4680 Battery Case Cylinder Cell Case for Lithium Battery

Tags :

Al-Clad CR2032 Coin Cell Case (20d x 3.2mm) for Li-ion Battery

This is a special CR2032 coin cell case with Aluminum coated on the inside and outside of the positive can (60pcs/pack). It can tolerate polarization of higher voltages (up to 5.5V) due to the passivation of cladding by electrolyte component (especially LiPF6 based electrolyte system) to form a layer of AlF3. This AlF3 layer is 1

Tags :

Laboratory Pouch Cell Making Case Forming Machine for Aluminum Laminated Film

This compact pouch case forming machine is suitable forpouch cell case forming of aluminumlaminated film of flexible packaging lithium battery, driven by pneumatic.

Tags :

Compact Disassembling Cutter Machine for 18650 Cylindrical Cases

MSK-530B cylindrical battery disassembling machine is a specialized machine designed for laboratory analysis of the internal state of cylindrical batteries. Different specifications of molds can be selected to disassemble cylindrical batteries of different models. Max: Diameter 50mm x Length 100mm; Min: Diameter 5mm x Length 40mm; This device uses 1

Tags :

Pneumatic Slitting Machine for Pouch Cell Case Cutting

AOT-MSK-121-MC is a pneumatic slitter for pouch cell case cutting. The pouch cell case was loaded with a fixture for cutting with defined size.

Tags :

Compact Disassembling Cutter for 18650 Cylindrical Cases (Optional for 21700, 26650 or 32650)

AOT-MSK-530 is a compact manually-operated machine for disassembling cylinder cases in the battery R&D lab. The compact body design allows easy operation inside a glove box to preserve & prevent the electrolyte and active materials from contamination during case disassembling. Simple operation with a safety protection cover

Tags :