Stainless Steel Ring Cut Die Suppliers,stainless Steel Ring Cut Die Manufacturers

Precision Disc Cutter With Cutting Die For Lithium Battery

AOT-MSK-T-10 is a compact disc cutter with quality sliding rail with ball bearing for precision cutting. It can be easily placed into a glove box with a transition chamber diameter larger than 230mm.

Tags :

Manual Coin Cell Disc Punching Cutter for Electrode Press And Separator

Made of alloy steel, high-frequency heat treatment on the head, high hardness, sharp cutting edge.

Tags :

Battery Electrode Slitter Slitting Machine

Semi-automatic Battery Slitting Machine for Pouch Cell Battery

AOT-MSK-300is a semi-automatic roll slitting machine for preparing electrode of cylinder batteries and pouch cell in laboratories.Eelectric slitting machine can be applied to the precise slitting process of positive and negative plates of lithium ion batteries. Sheet feeding, upper and lower circular knife slitting, electric drive,1

Tags :

Precision Die Cutter for Pouch Cell electrode Sheet

AOT-MSK-180 is a CE certified precision electrode die-cutting machine that accepts size customization. It is a must-have tool for producing specific shapes of positive and negative electrodes with current collectors in pouch cell production lines. IR sensor built into the front of the machine for safe operation.

Tags :

Manual Die Cutters for Pouch Cell Battery

Manual Die Cutters for Pouch Cell Cathode and Anode Electrodes

AOT-MSK-T11 is a manual die-cutting knife set for cutting cathode and anode electrode of pouch batteries. Can be put into the glove box for operation. One for cutting 57 mm x 44 mm cathode electrode sheets and the other for cutting 58 mm x 45 mm anode electrode sheets.

Tags :

Lithium Battery Tab Laser Cutting and Welding Machine

Tab Laser Cutting and Welding Machine For Lithium Battery

This equipment is mainly used for forming the tabs on both sides of the positive and negative plates of lithium batteries.

Tags :

Pole Piece Electrode Die Cutting Machine For Pouch Cell Battery

AOT-DC-80 die cutting machine is suitable for die cutting of positive and negative plates of pouch cell batteries. It is pneumatically die cutting and can be used in a glove box.

Tags :

Three Work Stations Stainless Steel Glove Box Vacuum Glove Box For Lab

It has real-time synchronization of equipment status, equipment data report records, historical data can be inquired, alarm messages are actively notified, equipment remote debugging, fault online diagnosis and online repair, online customer service and other intelligent functions.

Tags :

Heat Roller Press Machine For Battery Electrode Sheet Calendering With Winding System

1.This Roll Press Machine is a continuous roll to roll heat calendering machine . It has dual rollers of 150mm dia. x 300mm width and dual micrometer. The roll press machine is an ideal hot rolling press for adjusting thickness and increasing active material density of the electrode in Li-Ion batteries research after coating and drying. 21

Tags :

Compact Electric Ring Disc Cutter For Lithium Battery Machine

AOT-MSK-T13 electric ring disc cutter is a pressure controlled battery cutter. This press is driven by a motor, which solves the problem of oil leakage in the glove box of traditional hydraulic presses. It is also small in size, making it easy to pass through the transition compartment inside the glove box. It also can cut round disc and rectangula1

Tags :

Lab Flatbed Coating Machine

MSK-AFA-PD200 flatbed coating machine, equipped with extrusion coating mold, linear plunger feeding, minimum material loss of about 18ml, maximum coating size of 200x300mm, can be used in a glove box, suitable for low viscosity less than 1000mPa. s, coating thickness accuracy of ± 1 μ m, can be optionally coated with scraper, wire rod, and four sid1

Tags :

Manganese Dioxide Positive Electrode Sheet

Manganese Dioxide Coated Stainless Steel Foil Positive Electrode Sheet of Zinc ion Battery

Water based zinc ion battery positive electrode sheet, coated with active material (manganese based or vanadium based) On the surface of the current collector, pole pieces are made by rolling, die-cutting, etc., with high loading capacity, controllability, good processability, and adjustable pole piece parameter size.

Tags :