Sodium Foil Suppliers,Sodium Foil Manufacturers

Sodium-Ion Battery Electrolyte Material NaPF6 Powder

High-purity NaPF6 powder can be used to prepare liquid electrolytes with carbonate solvents for sodium-ion batteries.

Tags :

Prussian white Powder for Sodium-ion Battery Cathode Material

Prussian white (PW), which is the fully reduced and sodiated form of prussianblue(PB), which is called Prussian white because it contains high sodium (Prussian blue contains only one sodium) and appears white. PW could significantly improve the manufacturability of commercial batteries as it circumventsthe requirement of a reactive sodium-load1

Tags :

Sodium Nickel Iron Manganese Layered oxide for Sodium-ion Battery Cathode Materials

Sodium nickel iron manganese oxide is a chemical substance with the chemical formula NaNi1/3Fe1/3Mn1/3O2 . It is a composite oxide composed of four elements: sodium, nickel, iron, and manganese. Sodium nickel iron manganate has excellent electrochemical performance and is widely used in the field of batteries.

Tags :

Long Life Rate Sodium Iron Phosphate Na4Fe3PO4 Cathode Material For Sodium Battery

Long Life Rate Sodium Iron Phosphate Cathode Material For Sodium Battery

Tags :

PET Based New Composite Copper Foil For Battery Anode Substrate

Compared with traditional copper foil, PET substrate has good safety performance, light weight, and good ductility, which can help improve the energy density of batteries.

Tags :

PET Composite Aluminum Foil For Lithium Battery

Composite aluminum foil is a new-type of battery current collector, which has thinner aluminum film, overall lighter weight, and higher safty during penetration expeirment compared to the conventional rolling aluminum foil.

Tags :

Aluminum Foil Coating Sodium Nickel Iron Manganate

Sodium Nickel Iron Manganate Coated on Aluminum Foil For Sodium Battery

Sodium Nickel Iron Manganate Coated on Aluminum Foil,The contact between the particles and the current collector is better, and the internal resistance of the battery is smaller, which is conducive to the exertion of gram capacity and improves cycle and rate performance.

Tags :

NFSO High Voltage Sodium Iron Sulfate for Sodium-Ion Battery

The chemical formula of sodium iron sulfate is Na2Fe2 (SO4) 3, and its structure is composed of sodium ions Composed of iron ions and sulfate ions. In electrochemical reactions, sodium iron sulfate can release or absorb metal ions such as lithium ions and sodium ions through ion exchange reactions, achieving the charging and discharging process of 1

Tags :

NMC622 Single Side Coated Aluminum Foil for Battery Cathode Electrode Sheet

Reference for the use of Electrode Sheet: ①Electrode sheet cutting: AOT-DC-80 Cutting machine Recommended size of button electrode sheet: 12mm/14mm diameter. ②Pole piece weighing: AOT series balance active substance formula: active substance mass = (pole piece mass (mg) - disc area (cm2) * collector surface density (mg/cm2) * active substance propo1

Tags :

Lithium Battery Aluminium Foil Coating Machine with Vacuum Pump and Dryer

description： The battery coating machine is a device specially used for uniformly coating the surface of the positive and negative electrode materials of the battery. It enables precise control of coating thickness and speed to ensure the stability of coating quality and performance. In the lithium battery production process, the battery coating ma1

Tags :

Manganese Dioxide Positive Electrode Sheet

Manganese Dioxide Coated Stainless Steel Foil Positive Electrode Sheet of Zinc ion Battery

Water based zinc ion battery positive electrode sheet, coated with active material (manganese based or vanadium based) On the surface of the current collector, pole pieces are made by rolling, die-cutting, etc., with high loading capacity, controllability, good processability, and adjustable pole piece parameter size.

Tags :

Sodium Nickel-Manganese Oxide for Sodium Battery Cathode Material

Sodium Nickel-Manganese Oxide breaks the traditional sodium battery voltage range limit of 2-4V and can be charged up to 4.2V, greatly improving the energy density.

Tags :