Semi Auto Cylindrical Cell Grooving

Battery Automatic Assembly Machine Stacking Machine for Pouch Cell Battery

1、Equipment Overview This equipment is mainly used for experimental square lithium-ion power battery cell Z-shaped stacking, the equipment adopts automatic tension control system, cylinder driven diaphragm reciprocating movement, manual pressure knife to assist stacking, with high stacking efficiency, neatness and good characteristics. 2、Work flow 1

Tags :

Al-Clad CR2032 Coin Cell Case (20d x 3.2mm) for Li-ion Battery

This is a special CR2032 coin cell case with Aluminum coated on the inside and outside of the positive can (60pcs/pack). It can tolerate polarization of higher voltages (up to 5.5V) due to the passivation of cladding by electrolyte component (especially LiPF6 based electrolyte system) to form a layer of AlF3. This AlF3 layer is 1

Tags :

In-situ Analytical Split Test Cell for Lithium/Zinc Air Battery

It contains a quartz observation window on the bottom which allows in-situ X-Ray analysis of battery material phase transition during charging and discharging process. Two needle valves allow you control air flow pressure and its splittable design provides you the most convenient way to test various anode and cathode materials. It's1

Tags :

precision semi-automatic die cutter for pouch cell electrode sheets

AOT-MSK-180-N is a precision semi-automatic die cutter for pouch cell electrode sheets (Max. 200mm L x 200mm W). It is an updated version of MSK-180 with more stability and better accuracy at reducing the burrs and powder-shedding of the electrode sheets.

Tags :

Laboratory Pouch Cell Making Case Forming Machine for Aluminum Laminated Film

This compact pouch case forming machine is suitable forpouch cell case forming of aluminumlaminated film of flexible packaging lithium battery, driven by pneumatic.

Tags :

Narrow Slit Extrusion Laboratory Coating Machine

AOT-AFA-SD300 narrow slit extrusion coating machine, roll to roll method, continuous and intermittent coating, width 300mm, coating width 50-260mm, optional extrusion coating die head, coating surface density accuracy ± 1.5%, 150 ℃ hot air oven, suitable for 8-30 μ m thick metal substrates, optional NMP treatment and feeding device.

Tags :

18650 21700 4680 Cylindrical Battery Automatic Winding Machine

Suitable for electrode winding for 4680, 21700, and 18650 cylindrical batteries.

Tags :

automatic powder press machine (optional 20-60 tons)

Automatic powder press machine is the equipment for pressing powder materials. It is composed of a power system, a transmission mechanism, a mold, etc., and is driven by a motor to pressure the punch on the powder. It can accurately control the pressure, speed, high degree of automation, and can make electrode sheets in the production of lithium ba1

Tags :

20T Electric powder Press Machine

Tablet press is one of the ideal equipment for processing granular raw materials into tablets or granules in industrial sectors such as food, electronics, etc. It is suitable for small batch production, laboratories and other departments to press tablets, contact coal, sugar tablets, calcium tablets, coffee tablets, powder metallurgy, electronic co1

Tags :

Pure Nickel Metal Fiber Felt for Fuel Cells Battery

Nickel fiber felt is a type of fiber felt made of pure nickel metal, which has continuous three-dimensional mesh holes. It can achieve extremely high porosity and pore size.

Tags :

Automatic Isostatic Press Machine For Battery Manufacturing

The PP Series isostatic press applies 20-200T force with 300MPa omnidirectional compression, optimizing lithium electrode adhesion and cycle life. Featuring 7" touchscreen controls and auto pressure conversion, it accelerates R&D for batteries.

Tags :

Heavy Duty Disc Cutter with 4 Sets Die For Coin Cell Battery

AOT-MSK-T-06 is a precision disc cutter with max. the pressure of 600kN. This tool is manually operated and is designed for cutting round discs from a thin metal sheet/foil in the range from 0.01 mm

Tags :