Roll To Roll Hot Laminator

Electric Hydraulic Pressing Machine For Battery Material/Ceramic/Chemistry Laboratories

AOT- MSK-YLJ-E30T electric tablet press is a device that can press powder materials into sheets, and can be widely used in industries such as silicates, ceramics, powder metallurgy, and lithium batteries. This device uses a motor as the hydraulic drive system and adopts a digital pressure sensor to accurately control the pressing force, making it a1

Tags :

10-Ton Benchtop Heated Lab Press with Dual Flat Heating Plates

The AOT benchtop 10T manual hydraulic heated lab press is designed for heated pressing of polymer, ceramic powder and electrode/membrane films.

Tags :

Automatic Isostatic Press Machine For Battery Manufacturing

The PP Series isostatic press applies 20-200T force with 300MPa omnidirectional compression, optimizing lithium electrode adhesion and cycle life. Featuring 7" touchscreen controls and auto pressure conversion, it accelerates R&D for batteries.

Tags :

20um Battery Separator Polypropylene PE Film Battery Membranes

The PE separator for lithium batteries is made of polypropylene material and features a micro-porous structure. It can isolate the positive and negative electrodes to prevent short.

Tags :

5um Batteries Insulation Materials PE Separator Film

Lithium battery PE separator is made of polypropylene as the base material and forms a uniform microporous structure through processes such as biaxial stretching.

Tags :

10μm Lithium Battery PE Separator for Battery Manufcaturing

Lithium battery PE separator (polypropylene separator) is a porous film prepared from polypropylene as raw material through melt extrusion, biaxial stretching and chemical/physical pore-forming processes.

Tags :

Battery PE Separator
10μm Lithium Battery PE Separator

11μm Lithium Battery PE Separator for Lab Research

The PE separator is one of the key inner components of lithium batteries and is crucial to the battery's performance and safety. It is located between the positive and negative electrodes of the battery.

12μm PE Separator for Lithium Ion Batteries Insulation Film

The PE separator for lithium batteries is a microporous film made of polyethylene (PE) as the base material and is one of the key components of lithium batteries.

Tags :

12μm PE Separator

Lithium Ion Battery PE Poly 14um Polypropylene Film Separator

The functional film mainly made of polyethylene (PE) plays a key role in physically isolating the positive and negative electrodes to prevent short circuits.

Tags :

Battery Material 25μm Polypropylene Film PE Separator for Battery Research

The PE separator for lithium batteries is made of polyethylene material and features a micro-porous structure.

Tags :

Polypropylene Film

12+2um single sided ceramic coated separator (PE base film + alumina coating)

single sided ceramic coated separator features high thermal stability, low thermal shrinkage rate and high wettability with electrolytes.

Tags :

9+3 single-sided ceramic-coated separator (PE base film + alumina coating)

The coating forms a dense barrier through high-temperature sintering, enabling the separator to withstand temperatures above 1800℃. This effectively blocks heat conduction during thermal runaway.

Tags :