Pouch Cell Core Case Heat Press Machine Suppliers,Pouch Cell Core Case Heat Press Machine Manufacturers

Lithium Battery Aluminium Foil Coating Machine with Vacuum Pump and Dryer

description： The battery coating machine is a device specially used for uniformly coating the surface of the positive and negative electrode materials of the battery. It enables precise control of coating thickness and speed to ensure the stability of coating quality and performance. In the lithium battery production process, the battery coating ma1

Tags :

Battery Automatic Assembly Machine Stacking Machine for Pouch Cell Battery

1、Equipment Overview This equipment is mainly used for experimental square lithium-ion power battery cell Z-shaped stacking, the equipment adopts automatic tension control system, cylinder driven diaphragm reciprocating movement, manual pressure knife to assist stacking, with high stacking efficiency, neatness and good characteristics. 2、Work flow 1

Tags :

AOT-MSK-CSC-B350 the Micro-Battery Electrodes Slitting Machine

This equipment is used for the slitting process of lithium battery electrode coil, mainly suitable for cutting multiple narrow strips. The equipment has high cutting accuracy, adopts closed-loop tension control, and has a stable cutting structure. After cutting, the pole pieces have no defects such as ruffles, burrs, indentations, etc. Designed for1

Tags :

Desk-Top Dual-Shaft Planetary Vacuum Mixer w/ Optional Containers

AOT-SFM-16 is a compact dual-shaft planetary vacuum mixer. Compared to single-shaft models, the dual-shaft mixer comes with three segments of programmable mixing speed from 0 - 600 rpm, which provides more uniform slurry mixing. It has a built-in pump for removing the gas bubble, which can vacuum the mixing container to -0.08 MPa. One 150ml S1

Tags :

pouch pack battery test clamp Lithium ion pressure cycle test fixture

The pocket battery test clip ensures that the battery remains stable when subjected to pressure or external forces, thus accurately measuring the battery's performance parameters such as voltage, current, internal resistance, etc. The design of this fixture usually takes into account the size, shape and material of the battery to ensure the accurac1

Tags :

Al-Clad CR2032 Coin Cell Case (20d x 3.2mm) for Li-ion Battery

This is a special CR2032 coin cell case with Aluminum coated on the inside and outside of the positive can (60pcs/pack). It can tolerate polarization of higher voltages (up to 5.5V) due to the passivation of cladding by electrolyte component (especially LiPF6 based electrolyte system) to form a layer of AlF3. This AlF3 layer is 1

Tags :

Double Dispersed Axis Vacuum Planetary Mixer For Lithium Battery

MSK-SFM-9-5L dual dispersing shaft vacuum planetary mixer is an efficient mixing device that integrates low-speed mixing and high-speed dispersion. It combines orbital and rotational motion to achieve thorough mixing of materials.

Tags :

In-situ Analytical Split Test Cell for Lithium/Zinc Air Battery

It contains a quartz observation window on the bottom which allows in-situ X-Ray analysis of battery material phase transition during charging and discharging process. Two needle valves allow you control air flow pressure and its splittable design provides you the most convenient way to test various anode and cathode materials. It's1

Tags :

Lab Flatbed Coating Machine

MSK-AFA-PD200 flatbed coating machine, equipped with extrusion coating mold, linear plunger feeding, minimum material loss of about 18ml, maximum coating size of 200x300mm, can be used in a glove box, suitable for low viscosity less than 1000mPa. s, coating thickness accuracy of ± 1 μ m, can be optionally coated with scraper, wire rod, and four sid1

Tags :

15T Manual Hydraulic Press Machine For Lab Research

The 15t hydraulic press is equipped with molds of various sizes based on the mechanical lever principle. It is both practical and convenient.

Tags :

Manual powder tablet press(5T-40T Optional)

AOT-MC-540(5T-40T Optional) It is easy to operate and can be used without complex training, and users can flexibly adjust the pressure according to actual needs to adapt to the characteristics and pressing requirements of different powder materials

Tags :

Manual Hydraulic Press
Manual powder tablet press

Laboratory Electric Pellet hydraulic press machine(20-60T Optional)

AOT-MD-2060(20T-60T Optional) With the characteristics of precise and adjustable pressure, convenient and efficient operation, good molding quality, etc.

Tags :