Manual Powder Tablet Press Suppliers,Manual Powder Tablet Press Manufacturers

Quaterary Layered Ni-rich NCMA Powder Cathode Material for Li-ion Batteries

Quaterary Layered Ni-rich Lithium ion Battery Cathode Material NCMA

Tags :

NCM 811 Precursor Without Lithium NMC(OH)2 811 Material for Li-ion Batteries

NMC(OH)2 811 Material for Li-ion Batteries

Tags :

EQ-PSC Pressure Controlled Split Test Cell for Solid-state Battery

EQ-PSC is a split test cell for coinsolid state batteries, equippedwith aNylonsleeve or PEEK sleeve, which is designed for researching the effect of pressure on solid-state battery performance.

Tags :

High-Throughput 16 positions Pressure Adjustable Electric Crimper

AOT-MSK-HT-16 is a High-Throughput 16 positions Pressure Adjustable Electric Crimper for CR2016, CR2025, and CR2032 coin cells.

Tags :

Manual Coin Cell Disc Punching Cutter for Electrode Press And Separator

Made of alloy steel, high-frequency heat treatment on the head, high hardness, sharp cutting edge.

Tags :

Acrylic Glove Box With Pressure Gauge For Battery Research

This equipment is mainly composed of three parts, namely the main box, the transfer room and the side door. There are 2 glove ports. In front of the main vacuum glove box, the inside of the box can be clearly seen. Can also be customized according to customer requirements.

Tags :

Electric Hot Rolling Press with Variable Speed (Ar Gas Compatible)For Lab

AOT-MSK-HRP-01 is a compact hot rolling cylinder press, max. The working temperature is 100℃. It is specially designed for preparing battery electrodes inside and outside the glove box. It is compatible with Ar gas. In lithium-ion battery research, applications such as increasing the density of electrode active materials after coating are very effe1

Tags :

Pneumatic Hot-Press for Pouch Cell SEI Formation

AOT-MSK-131 provides a uniform pressure load and temperature environment for the tested pouch cells for more efficient and high-quality SEI formation. This hot press has precise and constant pressure delivery up to 400 kg and the maximum temperature is 150°C.

Tags :

Manual Die Cutters for Pouch Cell Battery

Manual Die Cutters for Pouch Cell Cathode and Anode Electrodes

AOT-MSK-T11 is a manual die-cutting knife set for cutting cathode and anode electrode of pouch batteries. Can be put into the glove box for operation. One for cutting 57 mm x 44 mm cathode electrode sheets and the other for cutting 58 mm x 45 mm anode electrode sheets.

Tags :

LiNI0.5Mn1.5O4 (LNMO) Cathode Powder For Lithium Battery

LiNi0.5Mn1.5O4 (LNMO) cathode material powders are attractive for next-generation 5V Li-ion batteries due to their high discharge plateau, good stability, and cycling performance.

Tags :

Pouch Cell Hot Press Shaping Machine For Core After Stacking

AOT-HPS-200H is mainly suitable for hot flat pressing after the battery core is wound. First, place the wound cell on the template, and shape the cell by pressing and heating, so that the thickness of the cell is consistent, the elasticity of the cell is reduced, and the short-circuit rate of the cell is reduced.

Tags :

Na3V2(PO4)3 Powder NVP for Sodium-ion Battery Cathode Material

Sodium vanadium phosphate(Na3V2(PO4)3), a cathode material for high tap density sodium-ion batteries, has the advantages of high specific capacity, excellent rate performance and long cycle life.

Tags :