Lithium Nickel Cobalt Aluminum Oxide Suppliers,Lithium Nickel Cobalt Aluminum Oxide Manufacturers

10μm Lithium Battery PE Separator for Battery Manufcaturing

Lithium battery PE separator (polypropylene separator) is a porous film prepared from polypropylene as raw material through melt extrusion, biaxial stretching and chemical/physical pore-forming processes.

Tags :

Cylinder Battery Cell Single Point Pneumatic Spot Welder

AOT-MSK330A is mainly used for welding the cylinder core's negative terminal (Nickel tab) to the bottom of the cylinder case. It can also be applied to welding processes for nickel hydrogen, nickel chromium, and various lithium-ion batteries.

Tags :

Cylinder Battery High-Frequency Inverter Spot Welding Machine

This machine is controlled by a microcomputer single-chip microcomputer. The welding operation is programmed, with beautiful weld points, small sparks.

Tags :

Sodium Nickel-Manganese Oxide for Sodium Battery Cathode Material

Sodium Nickel-Manganese Oxide breaks the traditional sodium battery voltage range limit of 2-4V and can be charged up to 4.2V, greatly improving the energy density.

Tags :

Lithium Battery Protection Board Tester BMS Tester

It is mainly used for the safety test of lithium battery protection board, and is compatible with various common protection board types.

Tags :

High And Low Temperature Alternating Test Chamber For Lithium Battery

The damp heat type high and low temperature test chamber is a special equipment for battery testing in the new energy industry.

Tags :

Ultrasonic Vibrating Screen For Lithium Battery

AOT-ZD-100 Ultrasonic Vibrating Screen is a laboratory vibrating sieve used for Different size material screening.

Tags :

Metal Nickel Strip Cutting Machine For Battery Tab Cutting

AOT-YS-100 Nickel Cutting Machine is mainly used for all kinds of metal and no-metal strip materials, such as copper foil, Aluminum Foil, copper foil tape, batteries nickel belt and so on.

Tags :

R2R & Sheet Substrate Slot Die Coater w/Continuous or multiple strips coating

The AOT-MSK-AFA-MR200 is a compact roll-to-roll slot die coating system with a low-pressure slot die coating head.

Tags :

High quality Laser Cleaning and Welding Machine for Lithium Battery Making Equipment

A laser cleaning and welding machine uses high - energy lasers for surface cleaning (removing dirt/oxides) and precise metal welding.

Tags :

Peel Strength Tester for Battery Electrodes

AOT-MSK-TE602-PS is lab-scale peel strength tester for battery electrodes or other thin-films. It equips a temperature control unit to enable testing under different temperatures.

Tags :