Compact Electric Ring Disc Cutter Suppliers,Compact Electric Ring Disc Cutter Manufacturers

Compact Split Test Cell For Coin Cell Battery

AOT-EQ-STC is a compact splittable test cell with optical grade quartz widow to analyze the interface of solid-state battery electrodes, mainly dendrite growth, via an optical microscope.

Tags :

Manual Coin Cell Disc Punching Cutter for Electrode Press And Separator

Made of alloy steel, high-frequency heat treatment on the head, high hardness, sharp cutting edge.

Tags :

100V 10A Charge 20A Discharge Battery Pack Testing Aging Machine

This aging cabinet is mainly used to test the charge and discharge cycles of lithium batteries. The test items mainly include: battery charging protection voltage, discharge protection voltage, capacity, etc. The equipment has four test steps: charging, discharging, shelving, and cycling. Test the battery according to the set process by editing the1

Tags :

Battery Charging and Discharging Tester Machine

512 Channel Battery Charging and Discharging TestIing Machine For Battery Analyzer Tester

5V6A Each device can carry out constant current and constant voltage charging and constant current discharge test on 512 batteries meeting the voltage range.

Tags :

Uniform Heating Adjustable Tilting Rotary Tube Furnace For Laboratory Research

AOT-T1200 series furnaces are split-able tube furnaces with Fe-Cr-Al alloy heating elements. The precision temperature controller can provide 51 segments heating and cooling steps with +/- 1 ºC accuracy.The furnace is installed with 60mm to 100mm O. D quartz tube with a pair of smart stainless steel vacuum sealing flange and valve/gauge which 1

Tags :

Electric Hot Rolling Press with Variable Speed (Ar Gas Compatible)For Lab

AOT-MSK-HRP-01 is a compact hot rolling cylinder press, max. The working temperature is 100℃. It is specially designed for preparing battery electrodes inside and outside the glove box. It is compatible with Ar gas. In lithium-ion battery research, applications such as increasing the density of electrode active materials after coating are very effe1

Tags :

Desk-Top Capacitive Discharge Spot Welder

Pneumatic Pedal Type Desk-Top Spot Welder For Lithium Battery

AOT-MSK-320A is a capacitive discharge spot welder driven by compressed air. It is specially designed for the production of battery manufacturers (NiMH.NiCd, Li-Ion/LiMnNi.LifePO4), welding is more reliable, more consistent and more accurate than AC pulse.

Tags :

Precision Die Cutter for Pouch Cell electrode Sheet

AOT-MSK-180 is a CE certified precision electrode die-cutting machine that accepts size customization. It is a must-have tool for producing specific shapes of positive and negative electrodes with current collectors in pouch cell production lines. IR sensor built into the front of the machine for safe operation.

Tags :

Tape Casting Coater with Heated Vacuum Bed And Doctor Blade

Battery Casting Coater Machine with Heated Vacuum Bed And Doctor Blade

MSK-AFA-H200A Is an standard Compact Tape Casting Coater with a vacuum chuck hotplate up to 250ºC and an active carbon filter on the top cover to protect the lab environment.

Tags :

Charging And Discharging Cycle Tester For Lithium Battery

This battery tester is mainly used for charging and discharging cycle test of lithium battery. The test items mainly include battery charging protection voltage, discharge protection voltage, capacity, etc. The equipment has four test steps①Charge, ②Discharge, ③Idle ④ Cycle. Test the battery by editing the corresponding steps and the set process.1

Tags :

Automatic Electric Crimping Machine For CR20XX Coin Cells

AOT-DF160 electric hydraulic sealing machine is mainly used in laboratory battery material research and development for the preparation of samples, capacitors scientific research sealing, can also be used in factory small batch trial production. The electric method saves effort, and different molds can also be used for dry powder pressing sheet, we1

Tags :

Pack Power Battery Charge And Discharge Tester Equipment

CE-6000 Module testing system is a high-precision charging and discharging equipment specially developed for high-power battery pack testing. It has the characteristics of high dynamic response speed, high stability and accuracy, flexible configuration of multiple channels, etc. It supports pulse test, cycle life test, and working condition simulat1

Tags :